Unable to connect to d600 with my bluetooth phone

To add Bluetooth functionality to your LG FB163, you can use a Bluetooth adapter that is compatible with the device. Ensure that the adapter you choose is compatible with the FB163 model. Once you have the adapter, follow the instructions provided with it to connect it to your FB163 system.

To connect your Android phone to the FB163, you'll need a compatible cable. Typically, you would use an auxiliary (AUX) cable with a 3.5mm jack on both ends. Plug one end into the headphone jack of your Android phone and the other end into the AUX input port on the FB163 system. Then, select the AUX input mode on the FB163 to hear the audio from your phone through system.

Look In Your Settings.
Then Go To General.
It Will Say
About
Usage
Network
Bluetooth
Go TO Bluetooth And Turn It One :)

hi
first hold start button for 8 to 10 second...when it start blinkin then open bluetoth device and click ADD tab. and search your device.when it will appear,it will ask for a unique pass.then choose your pass key.PLEASE MIND THAT THE PASS KEY MUST BE FOUR TIMES ZERO (0000) and then ok.it will connect......

Dear Friend
For Connecting phone via Bluetooth

• Need Bluetooth Dongle
• Install Bluetoth Dongle Software
• Plug in it
• Restart it(PC)
• Run The Programme
• Pair the Phone with PC
• Share the Files you need between PC and Phone

You are Done....You can Feel Free Contact Me........
Is this Helped You.......RAte mE
Thanks For Using FixYa

unable to perform bluetoth operatio.

The code is 8888.

Check bluetooth enabled (and probably device is discoverable) on your phone
Press big middle button for 2 seconds
Phone will prompt you for code - it's 8888
If you want to connect without having to do this in the future you will need to tell your phone to autoconnect (from its bluetooth menu)
Now, when you want to connect your phone, as long as bluetooth is on, all you need to do is press the big middle button briefly and it will beep and stop flashing to indicate you are connected.

you change the bluetoth ic

to copy files from MOTO L6 to my computer I used bluetooth. to get the bluetooth connectivity you may need a bluetooth dongle.

Follow the steps:
Install bluetooth software
Incert the bluetoth dongle and start the software
activate bluetooth on the phone
from bluetooth software search for available device
once your phone is detected you need to handshake with a passward.
now the file sharing option will be activated and u can access the files you are looking for.

enjoy!

Please restore the factory settings by pressing *#7370# it will ask for your security code (default 12345) enter it and proceed. Phone will restart. It will take a while to restore settings so please be patient. Once restored your phone's bluetooth should work just fine.
Important: Make sure phone's battery is fully charged (or keep the charger plugged in) before performing the above operation.

my bluetoth not stoped working in my samsung sgh-820 phone can't detect aor connect to any bluethooth