Question about Shark Vacuums
therre are usually aprings that hold the brush in position or a spacer thaqt turns when you adjust the height. turn the vacuum over and remove the plate covering verything. make sure your unplugged first. it usually takes about 5-6 phillips head screws. look for loose ,broken or missing parts. make the the roller is taken out and is carefully cleaned of all hair etc esp that just at the edge of the roller where it meets the monting devices. the hair and debris often gets stuck there and once removed works much better. also make sure the belt is not stretched and is slipping on the brush. if it is replace it. good luck.carefully reassemle the parts you removed being very aware of what postiotn everything was in when you took it apart. make sure everything has proper clearance and then test your vacuum. if you find broken or missing parts replace them first ofcoarse.
Posted on May 16, 2010
SOURCE: shark navigator n22
What I tried and it worked for me is to losen the hose slightly from where it connects to the long plastic tube on the side to allow the little hole to show. What that does is to lessen the suction power a little since the problem is that the suction is too powerful on the carpet and the roller freezes.
Posted on May 22, 2010
oh..this happened to me often..if you can get n the corner where the thread s..i used a seem ripper to get the thread out and cut..if this doesn't help send a picture..the seam ripper is great cause it cuts through hair too
Posted on Dec 10, 2012
Tips for a great answer:
Apr 02, 2018 | Shark Vacuums
Sep 24, 2016 | Shark Vacuum. Navigator Lift-Away Bagless...
Dec 31, 2015 | Shark Vacuums
Feb 14, 2015 | Vacuums
Nov 29, 2014 | Shark Navigator Lift-Away Professional...
Sep 04, 2014 | Shark Professional Pet Navigator Lift Away...
Jun 16, 2014 | Shark Helmet NV22L Shark Navigator Upright...
Apr 26, 2011 | Euro-Pro NV22 Shark Navigator Bagless...
Apr 06, 2011 | Euro-Pro NV22 Shark Navigator Bagless...
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: