Using latest Mac with new Archer C7 router, Linksys ATA, trying to set-up VoIP after network failure; router lists LinksysPAP as a DHCP Server, a wired client showing the same ID, but the ATA phone light is NOT on and the browser can't connect to the server; what am I to do to resolve the issue?.
SOURCE: Router unable to connect to internet
Are the info coming from PC connected to modem? If you are connected to Router and pulled up that Data, you might just need a power cycle. Turn off everything from PC to router - to Modem and Power on everything starting off with the modem this time. After power cycle, check if getting the same data. If yes, then type "ping yahoo.com" if you have four replies then you must be able to go online, if not then disable firewall (norton, maccafee etc)
SOURCE: PS3 can't obtain IP address through LAN switch
wonderful! that's always a good thing to hear - sometimes it is the "make sure you're power cord is plugged in" problem, eh :)
SOURCE: Installing
1. if your internet service provider did not provide these to you, they would stay blank. (most cable broadband internet would have these blank, for instance)
2. because you havent entered any dns entries. more importantly, most of the time what is more important is that you router is set to obtain dns from your ISP (service provider) if that is set correctly, its ok that they are all 0's
3. whether or not your connection should be set to the automatic type can only be answered by your service provider, most cable and some DSL broadband would be set to automatic, some DSL will be set to PPPOE, which will require the username and password given to you from your ISP. If they did not give you one, most likely this would be set to automatic.
4. DHCP server functions is what allows your individual computers in your home to share the internet if you have more than one machine. even if you do have just one machine, it should still be set to automatic.
5. The router name is for your reference, so you should name it something that is meaningful to you.
SOURCE: Connecting Mac to new wireless router. Getting
Go to System preferences then under internet and network in the left hand column click on + sign at bottom of the column then under slect the interface choose airport click on create and then click on turn airport on and then select your network name and if a password is asked for put in the password.
If airport does not show up it probably means that your mac does not have a wireless card in it.
Hope this helps.
SOURCE: I am unable to set up my Linksys WRT150N router security
Is there any computer connected to the router ?
If not then you will need to connect the computer
to the router.
Do not change any wireless settings on the router
with the wireless computer.
you will need to connect the computer to the
router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the
router.
Now once you change the network anme and security
on the router, you will need to connect to the
wireless network on your wireless computers.
Click Here for step by step instructions
83 views
Usually answered in minutes!
×