Question about Leviton Electrical Supplies
SOURCE: wiring cat 5 jack
If you're doing both ends, it doesn't matter. I tend to use "B" because if the other end is a patch panel, it natively (ie all wires in order) comes as a "B" panel. Less thinking on my part :-)
Posted on Jan 11, 2009
I think you should get a licensed electrician , if you dont wire it up correctly you could burn your house down and i dont think insurance companys take klndly to diy electrical work around the home .
Posted on Jun 05, 2009
Switch has 2 black wires. One black is hot wire. One black is wire going to fan. Turn off power. Remove wires from switch and separate. Turn power back on. Using ordinary tester, test each black wire to bare copper ground wire. Only one of the black wires will test hot. The other black wire goes to fan.
Timer black wire connects to black hot
Timer blue wire connects to black wire going to fan
Timer white wire connects to white neutral (in absence of white neutral, connect Timer white wire to bare ground)
Timer green connects to bare ground wire
Posted on Sep 20, 2010
Tips for a great answer:
May 14, 2014 | Leviton 5634 Dual 1 Pole Switch Decora...
Feb 22, 2013 | AMS Lutron SFSQ-F-HO Skylark Single-Pole...
Feb 24, 2011 | Leviton 5634 Dual 1 Pole Switch Decora...
Jan 25, 2011 | Leviton 6230M Decora Four Preset...
Oct 28, 2010 | Broan-NuTone P66V Fan Control Switch
Feb 28, 2009 | Leviton 003-1755-W Three Rocker Switches
Jan 03, 2009 | Hampton Bay (261025) Dual Mount Ceiling...
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: