Question about HP LaserJet Office Equipment & Supplies

Open Question

On my printer hp laserjet 2055 display at the first line hewlett packard and boot code on second

Posted by tsegay hagos on

Ad

5 Related Answers

Cindy Wells

  • 6220 Answers

SOURCE: how many USB ports does HP / Hewlett-Packard

If you have the standard configuration, this machine has 7 USB ports (4 on the back and 3 on the front).

I hope this helps.

Cindy Wells

Posted on Jan 22, 2010

Testimonial: "This HP desktop is a new offering and I could not find any detailed manuals or specs. So thank you for your answer."

Ad

Anonymous

  • 73 Answers

SOURCE: how to instal hp laserjet 2055 dn printer

Hi There,

Please follow the below link to download the latest version of the software and drivers :

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3662058&lang=en&cc=us&prodTypeId=18972&prodSeriesId=3662052&taskId=135

Please select your operating system and download and install the software and drivers.....

Hope this solution fixes your issue.

Thanks
Enjoy and Cheers !!!

Please vote for me if this solution fixes your issue : )

Posted on Nov 02, 2010

Ad

Anonymous

  • 152 Answers

SOURCE: My HP LaserJet M1522nf printer

Hello, a classic presentation of a failed formatter board, follow my link for a more detailed report and possible repair guidance... If you hurry I suggest HP should repair this under an extended warranty program.

M1522INFORMATION



Thanks and good luck Feb 3 11

Posted on Feb 04, 2011

BaronVonNuke

Mark Schmit

  • 1915 Answers

SOURCE: I have HP laserjet M2727nf

Your unit is displaying a common formatter failure. The good news is this:

Any HP M2727 manufactured before January 1, 2010 is covered by a service advisory that will get the printer repaired at no charge. You need to contact HP and get a case number or contact an authorized HP service partner. Be insistent, I have seen some service partners who have no idea that this service advisory exists. You can check the date of manufacture by looking at the serial number sticker on the back of the unit.

Posted on Mar 05, 2011

BaronVonNuke

Mark Schmit

  • 1915 Answers

SOURCE: FAX MACHINE HP LASERJET 1522

click here

This tip tells you what you need to do to get this machine fixed at no charge by HP

Posted on May 15, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

54.2 code what does that mean?


Description

The device has experienced an internal hardware error.

Recommended Action

Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.

Mar 16, 2014 | HP LaserJet 2840 All-In-One Printer

Tip

What is a Scanner Error 5 Hewlett Packard M2727nf MFP


prefab_0.jpg



"Scanner Error 5 or Error 8"

Hewlett Packard Laserjet M2727

The Copier Scanner is failing to initialize or find home position. The printer will have to have the Scanner replaced by an Authorized Hewlett Packard repair facility. The printer may at times "freeze" or "hang".

This printer is under HP Warranty until Mar 23, 2011

Contact Hewlett Packard for Warranty repair. See Link Below

http://welcome.hp.com/country/ca/en/contact/phone_assist.html

2 parts need to be replaced at the same time

Parts Required as follows

Formatter - CC370-60001

Scanner/Flatbed - CB532-67905

Warranty Extension Expiration 2011-03-23

on Feb 04, 2011 | HEWLETT-PACKARD Hewlett Packard 53A...

Tip

What is a Scanner Error 5 Hewlett Packard M1522nf



prefab.jpg
"Scanner Error 5 or Error 8"

Hewlett Packard Laserjet M1522

The Copier Scanner is failing to initialize or find home position. The printer will have to have the Scanner replaced by an Authorized Hewlett Packard repair facility. The printer may at times "freeze" or "hang".


Contact Hewlett Packard for possible Warranty repair. See Link Below

http://welcome.hp.com/country/ca/en/contact/phone_assist.html


Parts Required as follows:

Formatter CC396-60001 M1522N Printer
Formatter CC368-60001 M1522NF Printer
Scanner/Flatbed CB534-67903


on Feb 04, 2011 | HEWLETT-PACKARD Hewlett Packard 53A...

1 Answer

41.2 error hp laserjet 5200


41.2 error hp laser jet 5100
am from Ethiopia but when am check and replace the Formatter board ,beam not working but when am replacing the DC controller and all connecting cables to beam, then it was working god .

Feb 04, 2014 | HP Hewlett Packard LaserJet 5200 Printer

1 Answer

I have an HP Laserjet M3035 that has no display after a 2 second power outage.


Electrical spike may have toasted the circuit board. Common occurrence when power returns after outage

Sep 25, 2013 | HEWLETT-PACKARD LASERJET PRO P1606DN...

2 Answers

HP Color LaserJet CP 2025dn error code 59.70


59.XX this error is related to the fuser possibly a bad cartridge I have seen cartridges with the rollers seized & can't turn which will create different error codes

Jan 16, 2012 | HEWLETT-PACKARD HEWLETT PACKARD HP COLOR...

1 Answer

The printer is displaying error: B0605 on the screen


HI............
Issue Description: Print cannot boot up into ready state with an error message shown on printer control panel. The error messages include ERROR: B0601/ B0602/ B0603/ B0604/ B0605. Root Cause: Firmware crashes. Note: Inappropriate behavior may cause firmware crash. For example, a printer is turned off when critical firmware update is undergoing. Solution: Firmware Update Utility.
There are two use cases when encountering the issue: Instructions for Use case 1: driver is previously installed on PC
  1. Place printer in bootcode mode.
    1. Hold down the Cancel and OK buttons.
    2. Power on printer.
    3. Continue to hold down buttons until control panel dislpays Hewlett- Packard on the first line and Bootcode on the second line.
  2. c01688132.jpg Please observe the printer control panel and verify Downloading Update Data is displayed on control panel followed by Programming App Flash; please wait for upgrade utility to finish. Printer would be restarted automatically and the control panel display would show Ready .
Then the firmware is now successfully recovered. Instructions for use case 2: driver is NOT previously installed
    1. Insert printer installation CD.
    2. In Windows OS, please go to Start , Settings , Printers and Faxes .
    3. Click Add a printer to start Add Printer Wizard as shown blow and click on Next button. c01688133.jpg
    4. Check Local printer attached to this computer box; uncheck Automatically detect and Install my Plug and Play printer box and click on Next button. c01688134.jpg
    5. Select FILE:(Print to File) in the Use the following port: dropdown list and click on Next button. c01688135.jpg
    6. Click Have Disk... button. c01688136.jpg
    7. Browse to the CD drive in which the printer installation CD is inserted previously and click OK button. c01688137.jpg c01688138.jpg
    8. Highlight the HP LaserJet P2050 Series PCL 6 found in the printer installation CD and click on Next button. c01688138.jpg
    9. Specify the Printer name and click on Next button.
    10. Select No for Do you want to print a test page? and click on Next . c01688139.jpg
    11. Click the Finish button and allow driver to install as shown below. c01688140.jpg
    12. Verify printer is listed in Printer and Faxes window as shown below: c01688141.jpg
  1. Place P2055 in boot code mode:
    1. Hold down the Cancel and OK buttons.
    2. Power on printer.
    3. Continue to hold down buttons until control panel dislpays Hewlett-Packard on the first line and Bootcode on the second line Printer is now in bootcode mode.
  2. In the Printer and Faxes window, right click on the HP LaserJet P2050 Series PCL6 icon and select Properties .
  3. Click the Ports tab and view the USB ports as shown below.
    NOTE: If more than one (USB001) please take note of all listed ports, as other installed printers may have USB ports (USB002, USB003, etc). c01688142.jpg
  4. Close Properties window.
  5. Plug in USB cable from to PC
  6. The Found New Hardware Wizard will pop up, and tje printer USB enumeration will happen.
  7. Open printer properties and select Ports tab again.
  8. In ports tab, tick the correct port that the HP LaserJet P2050 series printer is enumerated on and click OK . c01688143.jpg
  9. Click Cancel on Found New Hardware wizard window.
    NOTE: Not the driver is installed and it is pointed to correct USB port.
  10. Run HP LJ P2055 Firmware Update Utility.

Sep 21, 2011 | Computers & Internet

1 Answer

What is HP Laserjet 4700dn error code 57.01?


Hi deek768:
You are having a fan issue. Check all fans to insure that they are working properly and replace the one you are having the problem with.

Hope this helps

Jul 10, 2009 | HP Hewlett Packard LaserJet 4700dn Printer

1 Answer

Hewlett-packard


What is the problem with the printer, these printers are very solid printer and are generally not prone to problems, I would recommend updating the firmware and possibly taking it in for service, Contact hp for more info, 1800 334 5144

Al

May 05, 2009 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...