Question about GE WBVH6240F Front Load Washer

3 Answers

Shaking like crazy

I have a brand new GE front load washer and the first time we put it to work it started shaking and viberating like it was possessed. It literally vibrated 3ft outside the laundry room.

Posted by on

  • 2 more comments 
  • lanternhill Mar 11, 2008

    I have the same problem with my front loader GE washer and GE will NOT stand behind it. The serviceman made it clear that he knows there is a design problem but he has to report that it is operating as designed. My advice is take it back if you can. My builder said it would damage my home. GE said I should have put my laundry room in my basement!

  • lindros2 Mar 18, 2008

    same problem - i'm infuriated.

  • Anonymous Mar 19, 2008

    I have the same problem. The wierd thing is it only occurs when I wash the bathrobes. I had a GE tech come in and tell me that the problem was occuring because it wasn't balanced. The next day when I did a load of wash the same thing happened again. I had another tech come in a few weeks later and he looked at it and ordered me a new tub and a bunch of other parts that they are installing this coming Friday. I will keep you all updated if this fixes my problem.

  • rexryder Apr 11, 2008

    Shaking, Have had repair men out balance is ok. Still shakes the whole house! Sheared floor underneath washer for better support. Helped but still shakes. Need a solution before it damages other items in my laundry room and home. I have the drawer that sits underneath it .



3 Answers

For the new machine that is violently shaking, make sure the shipping bolts in back are removed and their plastic pins.
For a machine that has developed this problem, it may be the shocks under the tub. these can wear out. but check level and balance first.
When it is on the pedestals the rubber shims are not supposed to be there, they are for dryer only.

Posted on Apr 19, 2008


Eat it

Posted on Feb 11, 2008


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Expert
  • 249 Answers

ALERT. transit brackets still on machine ..REMOVE THEM;;

Posted on Nov 25, 2007

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

GE GFWS3500LOWW not starting on any cycle

GE Washing Machine GFWS3500L0WW Troubleshooting ...
GE Washing Machine GFWS3500L0WW ... Washer fills slowly · Washer leaking water · Washer won't start · Washer won't spin or agitate · Washer overflowing ...
Repair Help - Model Help Symptoms for GE Washer Model #gfws3500l0ww. Shop Parts ... Slow or noagitation or spinning ... Not working at all ... Clean Washer cycle won't work.GE front load washer door latch your GE front load washer has a door latch problem such as the door will not lock or... You should always use HE detergent on any front load washer. ... manually unlocking the door and pouring cold water into the tub then start a new cycle.GE Front Load Washer Service

Jan 28, 2016 | GE Washing Machines

1 Answer

Our new GE front load washer shakes/ vibrates and moves during the spin cycle

When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about that...

Washer Problems Washer noise when spinning


Aug 22, 2010 | GE WSXH208A Front Load Washer

2 Answers

GE Front Load washer shakes whenever any type of load is put in. GE service has been out at least 4 times and say that its fine..perfectly level, etc

All front loaders shake to some extent. It depends on the balance of the load. It is especially evident in the spin cycle due to the high speeds. Also these machines are best placed on a solid cement floor. They can shake an entire house if on the first or second floor and the floors are not well reinforced.

Feb 25, 2010 | GE WSXH208A Front Load Washer

2 Answers

Ge front load washer won't go into rinse cycle.

Check the cold water hose. My brand new machine had this behavior until I discovered a kink in the cold water hose - works great now.

Jun 03, 2009 | GE WSXH208A Front Load Washer

3 Answers

Shuts off in middle of cycle

I am having the same problem w/ our brand new front loader washer, it pauses constantly, and even when I can get the load to finish, I have to drain and spin atleast 3 x before I can even attempt to put in dryer, at this point it is taking me hours to do one load of laundry!!
Ugh-- Service man is coming tomorrow, so I will share what I learn...

Apr 19, 2008 | GE WBVH6240F Front Load Washer

1 Answer

Washer shakes, as if out of balance, after all water is drained

Biggest problem i get on the front load machines are spinning and draining problems. First thing to check is make sure your soap is not foaming up. If you see alot of suds in the machine when it is washing switch brands h.e. soap is best but he liquid tide has been a big problem with suds. Next make sure you put equal size items don't mix heavy and light items in machine as this may have off balance issues! Next check the coin and pintrap if it has one some machines have filters on the front of the machine that need cleaning.After these have been checked see if the machine has any unusual noises or odors when used rubber burning odor or electrical odor when in use may indicate a overloading or internal problem with the machine.

Oct 09, 2007 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
GE WBVH6240F Front Load Washer Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts


Level 3 Expert

85223 Answers


Level 2 Expert

157 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides