Question about Music

2 Answers

Looking for instruction manual for Crate PA-6 / 6 channel Powered Mixer

Posted by Shirley Duckett on

Ad

2 Answers

Mark Cheong

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 791 Answers

First, I'm not a Crate Tech.
* call for support; http://www.crateaudio.com/

*** following for information only ***
* customer review; https://www.youtube.com/watch?v=HOHZqUV0G5g
* Specs; https://reverb.com/item/3943609-crate-pa-6-6-channel-powered-mixer
* PA6FX 220W specs; https://www.musiciansfriend.com/pro-audio/crate-pa6fx-220w-powered-mixer-factory
* PA6FX Fixya solution; http://www.fixya.com/support/t7490014-crate_pa6fx_powered_mixer_powers_but
* Forum with link to manual (not free); http://music-electronics-forum.com/showthread.php?t=38268
* eBook manual (registration required); https://pdfentity.co/downloads/crate_mixer_manual.pdf
* Looks like most of the PDF links for this manual are dead links. Everyone else wants to charge for the download.
* There is also an issue with the "CRATE" brand is now a subdivision of Loud Technologies in 2003; https://en.wikipedia.org/wiki/LOUD_Technologies#Crate
* Support; https://loudaudio.com/
* Contact; https://loudaudio.com/contact/
* I've noted the "Crate" link is no longer active for this web site.

Aloha, ukeboy57

Posted on Jul 18, 2018

Ad

Terry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Music Master
  • 11,377 Answers
Ad

1 Related Answer

Michial Gueffroy

  • 1140 Answers

SOURCE: looking for manual for crate PA-6 FX pa system

Here is the link:http://img3.musiciansfriend.com/dbase/pdf/man/m_631543.pdf

Posted on May 19, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kustom KPM8420 PA mixer and the monitor channel comes through both the monitor and main speakers and vice versa. The two channels are not separate.How do I fix that?


On the back panel there is a section labelled Patch Bay
There are 2 small switches which assign each Power Amp to either Monitor or Main Output.
It would seem you have them both set the same at present. Set one to Monitor and one to Main, and use the corresponding Power Amp outputs direct to speakers.

Note you can send signal to external amps or powered speakers from the preamp outputs. This is really handy.
Download and print the manual from https://www.manualslib.com/manual/90516/Kustom-Kpm-8420t.html
and keep it with the mixer.

( Of course don't send speaker outputs to other amps or powered speakers )

Sep 11, 2017 | Kustom Music

1 Answer

How to get sound from a nady audio 4130 mpm 4 channel power mixer


First, plug it in. Next connect the speakers. Center all eq controls both master and channel. Turn off any reverb or effects. Turn the master volume 1/2 way up. Plug a sound source into channel 1 wiyj the channel volume all the way off. Turn on the amp. Slowly raise the channel volume until you heat output. If you get nothing, it's broken.

Nov 10, 2016 | Nady Systems Music

1 Answer

How do I plug mixer into pa speakers, monitors, instruments


Without knowing what make and model of the gear you're looking to connect, I can't give you a definitive answer. However, in general, if you have a powered PA mixer, meaning it has both a mixer section and a power amp section in a single box, the main speaker outputs will be on the rear panel of the box and marked as such. There will also be a jack for monitors, but some mixers have an amp for monitors, some just have an output for the monitor mix, but not an amp for them, and on some you can switch the main outputs to feed either a Left and a Right speaker, or a front mono speaker and a montior speaker. Instruments will go into the individual channel inputs.

Feb 08, 2015 | Music

1 Answer

Sound cuts out


check the free air circulation in the power amp module, also check your speaker's impedance, let me know further, sorry for the late answer.

Sep 01, 2012 | Peavey XR 1220 Powered Mixer Mixer Powered

1 Answer

I have a pmp6000 powered mixer. I was running an ipod in and sending out to one powered speaker. I heard a loud pop and smoke started pouring out of the mixer. I immediately stopped using it. This morning...


Cease using the mixer until it is repaired. One or both of the amps have blown. Further use MAY result in power supply damage. 1 to 6 switching power transistors will have blown and often a Zener diode or two. If the metering resistors smoked, there will be two small surface mounted transistors per channel blown wide open as well. These are all in the HCA2400 amplifier module.

Feb 12, 2011 | Behringer PMP6000 / B215XL Powered Mixer...

1 Answer

Where (on-line) can we find download for advanced manual for Behringer PMP 4000 16 channel powered mixer? What we found on-line was the exact manual that came with the mixer.


There really ISN'T and "advanced" manual... Everything you need to know is in the user manual that comes with it... Service manual with schematics will not give you much you can use unless you are into electronics detail.

PLEASE read my tip about Behringer PMP mixers on here regarding a hazard if you use Speakon to 1/4 inch cables or adapters. Essentially, the sleeve, NOT the tip is the HOT lead for a speaker on channel A. Ground it inadvertently and goodbye channel A amp.

Be VERY careful of speaker leads with this amp as it is easy to pop a channel IF a speaker comes loose or shorts. Loop cables through the handlesto avoid cables being yanked out or breaking plugs.

Feb 09, 2011 | Behringer PMP4000/B212XL Mains & Monitors...

1 Answer

None of the channels work. Most of the LED lights work. Im going thru the beringer mixer for power but using another mixer.


If you plug into the PA input or inserts of this unit, that DISCONNECTS all the mixing channels within this unit and none in this unit will work. That is how it is supposed to work.

If you wish to use another mixer as well as the channels in this, I suggest you run the other mixer into one of the stereo channel inputs OR the CD inputs, although the CD are NOT balanced inouts and subject to higher noise level.

Feb 01, 2011 | Behringer Europower Pmp5000 Powered Mixer...

1 Answer

Looking for manual for crate PA-6 FX pa system


Here is the link:http://img3.musiciansfriend.com/dbase/pdf/man/m_631543.pdf

Apr 29, 2010 | Music

Not finding what you are looking for?
Music Logo

Related Topics:

807 people viewed this question

Ask a Question

Usually answered in minutes!

Top Music Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...