Give me hints

MANUAL RECORDING FROM COMPUTER HEADPHONE SOCKET.. FIRST RIGHT LEAD REQUIRED YOU NEED STEREO 3.5mm stero jack plug to lef right phono male leads... prepare for manual record place jack in computer headphone socket. check correct socket play track on computer their should be no sound. if sound present in wrong socket... if ok place phono left right into analogue aux inputs on cdr recorder.next make shure you have blank scratch free cd .next press ext(ernal) source repeatedly until the required input is selected i.e digital analogue optical etc..when auto track is on the disk will number automatically.with auto track on it their needs to be 2.7 second gap to rec number change. with the recorder stopped press rec type five times to enter in the manual record standby mode. manual start s to flash and the display shows REC EXT MAN followed by WAIT.after a few seconds press record . play the source track ie on your computer to set record level on cd recorder.. adjust audio card settings or volume control on pc etc .rotate easy jog/enter key until on the record /play level bar all the blue led are alight but not the red( clipping) display shows xx decibel eg 3bd. stop the source material (track on computer get ready to record ii.e to start track again..to start recording set you track going wilst pressing RECORD on the cd recorder, and immediatley the source material playing. the track number and recording time left appear in display . if check input message is displayed check the connections are correct etc .to stop recording press stop on cd recorder . update lights up and arrow goes out. after recording display will show UPDATE FOR SEVERAL SECONDS WRITTING TOC.. IF YOU WANT TO PLAY THIS DISC ON NORMAL CD PLAYERS YOU NEED TO FINALIZE THE TRACK . HOPE THIS HELPS..yammandan.

Please follow the below mentioned process:

1)press menu
2)press up/down to tam
3)press ok
4)It will say play(press ok to play messages), or press up/down till delete all
5)press ok it will say confirm
6)press ok this will delete all messages. If you want to record your own message follow steps 1 to 3 then 4)up/down till ANS MODE press ok,
7)scroll up/down it will say, ANS ONLY or ANS + REC,
8)select ANS + REC, press ok,
9)it will now say PERSONALIS(your own personal message) or PREDIFINED(standard answerphone message), select PERSONALIS press ok 8)now it will say PLAY MSG scroll up/down it will also say RECORD MSG, press ok hold phone to your ear till you hear a beep, record your personal message then press ok, if you go back to step
10) you can hear your message.

In normal mode, Press and hold 0 key to turn on/off answerphone and your personal message will be on.

To delete messages press 2 key for 2 seconds as messages are played press 6 to delete, you can delete messages before or as they are playing without listening to whole message.

Please let me know if the provided information has been helpful.

Please rate me if the information provided was able to help you.

Please Re Butto Operate after pussing Reset

Helloooooo, I bought a panasonic nv md9000 camcorder, but didnt got drivers, now I cant connect it to My pc, from where I can get its drivers please help me!
it hasn't to connect to the pc.

Salutations welove2scuba,

I would first ask how you are connecting the computer, it would be best to use a "Line In" jack to your computer if you have one. Using the microphone jack could cause issues as it is a powered connection and could be causing your feedback.

A good way to connect a computer to a receiver would be to treat it as if it were a cassette recorder. Most receivers will have a "Play (out)" and "Rec (in)" for a cassette deck, or DVD recorder and in some cases VCR's. If you connect the "Rec (in)" to the "Line In" jack, this should give you a clean signal with out any additional amplification to avoid interference.

Cordially,
Jon
Go Ahead. Use Us.

try with software support. head sw pulse may defective.

you may refix the mechanism. problem will solve.

...and try this first...:
You need to know in which position was camera turned of.
So try turning it on in RECORD OR PLAY position.
It will work then...

hi i think u r from india i am from india too first of all put a new cassete in that camera and play your head cleaning cassete in that camera so that your problem is solved otherwise you have to change your camera video head or have to adjust your camera,s deck portion bye aman [email protected]

comon fault in it , as the picture stucks it is a weak heads you can get better result by cleaning the guides and if not so change drum heads regards , plz don't forget to rate thx