Manual for aeg upright freezer artic with icemaker

Check with your users manual offers any advice or follow this link

https://www.repairclinic.com/RepairHelp/Refrigerator-Repair-Help

I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

what was the reason for the trouble code --if problem not fixed trouble light will keep flashing if light flashing due to temp when setting is reached will stop

https://www.repairclinic.com/RepairHelp/Refrigerator-Repair-Help

I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

probable a warn rubber mount on the compressor unit.....easy to replace or just repair with some silicon.

Hi,

With the door left open moisture would get into the unit behind the walls and into the duct work. The only way to fix this right is to unload it and let it unthaw for a day or so open. Once it is all defrosted and restarted it should be fine again.

Just fixed a similar model from Electrolux. It's not the fan that was faulty, but its transformer on the pcb. The fan has its own pcb, a small one on the left side and is controlled via 230V from the main board. It's easy to remove, turn around and measure.

I would replace the thermostat because is the only thing that controls the temp. , also there's a timer and a terminator but them are only for defrosting the unit.

Go to there website and see if you can find your model. You can also contact them from there.
http://www.aeg-electrolux.co.uk/node145.asp?CategoryID=2595

Also get yourself a stand alone fridge and freezer thermometer - leave it in for an hour -that will establish what the temperature really is which will help in diagnosing the cause.

Also trying unplugging it for 15 minutes so the display board loses power - then plug it back in - sometimes that will reset it.

aeg santo fridge/ freezer

The fridge part of my appliance is not getting cold please help

good place to start is the starting device for the compressor.slip the cover off the compressor electrics on lhs of compressor usually and you may find the relay burnt out.tyhis is the mostly area but if elsewhere, look at the defrost element and check wiring loom