Question about Frigidaire Ovens
Problem occurs similarly with both top and bottom ovens. Have checked and reset circuit breaker to no avail. Anyone else have any history with this issue?
Mewood What part did you call "thermostat"? If you?re talking about the device which operates the oven temperature, your oven does not have such thermostats. It has two oven temperature sensors (one in each oven) and a control board (ERC). An error code "F4" will be displayed along with a beeping sound if the ERC determines an open oven temperature sensor circuit. It can be the sensor itself or the wires that connect the sensor to the ERC. The F4 message will not be displayed in the time of day mode. To get access to an oven sensor and wires, the oven has to be removed from the cabinet. Then you have to remove the rear cover. Then unplug the oven sensor and check the resistance across the oven sensor. It?s supposed to be about 1100 ohms at room temperature. If the resistance is incorrect, the sensor is bad and needs to be replaced. If not, check all the wires from the oven sensor to the ERC. If it is not the sensor and wires, you have to replace the ERC, but most likely the problem is with the wires and/or connections. Part number for ERC is 62965, part number for oven sensor is 62593. Gendos....post back.
Posted on Dec 15, 2006
SOURCE: Bosch oven not heating to temp
i recommend u to try the following routine to sort out this problem
hope u find this useful. thank you.
Posted on Jul 09, 2008
I found the manual online. Apparently my unit is malfunctioning and should work by just pressing bake temp and then selecting the temp...
Posted on Dec 03, 2008
sounds as if perhaps there has been a thermal overload(switch) tha has gone bad, refer to part number 119 on bothe the lower and upper oven for refernce , you should have continuity trough the switches.
Posted on Dec 21, 2008
Try turning the breaker to that unit off and keep it off for 20 minutes or overnight, if possible, then flip the breaker back on. If it still shows the PF code, call us and we can get the correct part to you. Hope this helps.
Posted on Aug 28, 2009
Tips for a great answer:
Feb 12, 2018 | Frigidaire Ovens
Jun 15, 2015 | Kenmore Ovens
I appreciate your inquiry, J.J!
From what you have described your Frigidaire oven is displaying an error code of "PF" and you just installed the control panel. A "PF" error code stands for power failure. This could be a possible problem with your control panel and power source. You may need to perform a reset on your oven and you can do that by flipping the household circuit breaker off for at least ten minutes. If this does not help resolve your issue I would recommend having a professional technician out to perform a proper diagnosis and repair. I hope this information is helpful to you. -Matt
May 10, 2015 | Frigidaire Ovens
Jan 21, 2018 | Ovens
Nov 29, 2010 | Frigidaire Ovens
Aug 28, 2009 | GE JTP20 Electric Single Oven
Jun 26, 2009 | Frigidaire Ovens
Dec 02, 2008 | Frigidaire FEB27S5A Electric Single Oven
Apr 11, 2008 | Ovens
Dec 15, 2018 | Frigidaire Ovens
78 people viewed this question
Usually answered in minutes!