Question about Kenmore Air Purifiers
Hi FCfogl, Here's you answer. Go to the URl below for detailed instructions with pictures. http://www.airpurifierrepair.com/PageInfo.aspx?page=ReplaceUV Hope this helps
Posted on Sep 26, 2007
Power Off the unit then Press and HOLD the Off-Timer and Function buttons at the same time WHILE Powering the unit back On. The Replace Filter light will blink for 5 seconds than go out. Now you can release the the buttons.
Just to make sure everything is working fine power off and on the unit.
On a side note if you are a tight wad like me you may want to just smak the filter layers against the ground a few times to clean them and re-use them / make them last longer. When the replace fileter light comes on too often then it is time to replace the filter.
No worries ;o)
Posted on Nov 16, 2008
SOURCE: Hi,I cleaned the plates on
I've had a problem with the contacts being broken. there are little contacts on the bottom of the plates that spring out when it is reinstalled. they push against 2 wires inside teh unit. make sure they have good contact...
Posted on Sep 06, 2010
Testimonial: "The information was helpful,will try it and see if it helps.Thanks"
Tips for a great answer:
Nov 22, 2016 | Honeywell Air Purifiers
Apr 13, 2016 | Hunter Air Purifiers
Jun 07, 2014 | Oreck XL® Tower Air Purifier
Jan 21, 2013 | Blueair 301 Air Purifier
Sep 02, 2011 | Sharper Image Professional Plus Ionic...
Jun 25, 2010 | Honeywell 17352 Quiet Care Programmable...
Apr 06, 2008 | Kenmore 85244 Air Purifier
Feb 02, 2008 | Brookstone Pure-Ion (506840) Air Purifier
Jan 18, 2008 | Kenmore 335 CADR Air Purifier
593 people viewed this question
Usually answered in minutes!