Question about Leisure Kitchen Ranges
It sounds exactly the same as I am experiencing on my oven of the same model. My theory is that the full flame gas is controlled by a thermostat, and that this has broken hence why the oven only stays on preheat. This will be a matter of a replacement part. Most likely the thermostat is a bi-metal strip that, because it has heated and cooled so many times in it's life it has simply finally given up. Try searching online for the correct part and get a corgi registered fitter or another suitably qualified fitter to come and replace it.
Posted on Apr 07, 2008
most likely thermal fuse behind oven take off back plate and you will see the brown wire with the heat shrink sleeving covering the fuse.wire and fuse comes as one part
Posted on Jul 24, 2010
I had a similar problem when my new Leisure cooker was installed last December. The burners would light when I held the knobs in but when I let go the flame would go out. The engineer took off each of the burner knobs and stuck a small wad of aluminium foil between the inside of the knob and the contact on the front of the cooker - he said it's a design fault and the gap is just a bit too large for contact to be made reliably. This fixed the problem and I've had no trouble since.
Posted on Aug 06, 2010
Tips for a great answer:
Aug 30, 2016 | Kitchen Appliances - Others
Nov 15, 2014 | Leisure GRB6CVK Electric Cooker with...
Jul 30, 2014 | Leisure Kitchen Ranges
Apr 19, 2017 | Leisure Kitchen Ranges
Jul 05, 2010 | Kitchen Ranges
Jun 22, 2010 | Ovens
Jun 03, 2010 | Rangemaster 110 (Dual Fuel) Dual Fuel...
Jan 24, 2009 | Cannon 10476G Dual Fuel (Electric and Gas)...
Oct 26, 2008 | Kitchen Ranges
Jan 29, 2008 | Belling DB2 Dual Fuel (Electric and Gas)...
Aug 11, 2018 | Leisure Kitchen Ranges
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: