Question about Riccar Sewing Machines
Google (riccar)(RL739ed)(manual) without parens.
Posted on Jul 03, 2018
Usually, the looper separation is permanently set. You can change the length but not the width of the stitch. You can also change the distance the stitches are from the edge of the fabric.
Posted on Jul 03, 2018
SOURCE: Euro pro serger model 101-548
3 thread overlocking (serging) is no different t 4 thread, except you remove one or other of the needle threads.
The stitch width is then controlled by two variables,
the manual width dial selector, and
your choice of either the right or left needle
Suggest yo play with width selector on a scrap of your project fabric to achieve the look you are after.
Posted on Feb 17, 2008
call brothers hot line 1-901-373-6256 tell them your problem and part no, if you know it if not they should be able to help you
Posted on Mar 13, 2008
SOURCE: parts for 1034D brother serger
UGGGGHHHH I Give already!!!!!!!!!!!!!!!!
I have been online looking for two weeks every night, i have hit every store i can think of. Even the store the Brother 3034D was purchased at and i STILL cant find the replacement knives. I am getting them as a gift for a friend for Christmas and talk about a nightmare. I have tried more than 20 sites. I give in... HELP!!!
Posted on Nov 25, 2008
You will need to buy a new looper from a dealer with a spare parts account for this brand.
It is tricky to set up the loopers without a service manual, so best suggest you also have them install and service the machine at the same time or you risk breaking the new one if it is even slightly out of alignment.
You may also find that parts availability at this time of year will be restricted as many businesses and suppliers close for several weeks.
Posted on Dec 28, 2008
SOURCE: treading my serger
When you thread the serger, your suppose to start threading the 3rd spool (left to right) first, then the 4th spool, then thread the 2nd spool which ends up in the second needle (left to right), There is a lever or bottom looper that the thread must go through before placing thread through the 2nd needle. Finally, the last spool to thread is the 1st spool (left to right). Follow the threading pattern and once you put the thread through the two loops that look like springs, turn the wheel at the right toward you until you can see like a lever with a ****, thread that **** from the back then put the thread through the machine to the right. Turn the knob to toward you again until the upper looper is showing, then you have the put your thread through the hole in that looper then through the first needle. You should now have 4 thread toward the back of your machine which you need to place under the presser foot and to the left side of the machine. There is also a VHS video that goes with the machine to help explain how to thread your serger. Also be sure that each spool of thread is in the tension of the upper colored tension wheels. If it is not, then your stitiches will be loose. Good luck and I hope this helps. I had to watch the video several times before I got it. If you don't have the video, try ebay for and perhaps you can obtain one. The video is Speedylock 1600, instructional video, USA Part #136000016, Perhaps you can contact White and see if they have one you could purchase.
Good Luck Serging!!!!
Posted on Feb 02, 2009
Tips for a great answer:
Dec 30, 2015 | Sewing Machines
Dec 19, 2015 | Sewing Machines
Mar 31, 2012 | Sewing Machines
Oct 16, 2011 | Simplicity Serge Pro SW432 Mechanical...
Apr 01, 2010 | White Sewing Speedylock 1600 Mechanical...
Mar 19, 2010 | Janome Memory Craft Compulock
Feb 22, 2010 | Riccar Sewing Machines
Aug 10, 2008 | Baby Lock Eclipse Serger
Feb 17, 2008 | Euro-Pro 534DX Mechanical Sewing Machine
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: