Question about Sharp Refrigerators

2 Answers

Hellow my sharp refrigirator fan is not working yet but fan is ok i checkd model Sj-434fg/fa/wg/wa i also change the bi- metl and fan fuse and also changed the timer Please advise ASAP

Posted by Anonymous on


2 Answers


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    Visited the website for 30 consecutive days.

  • Master
  • 572 Answers

Door need to be close for fan to work or you can press the door switch .Check for power to fan

Posted on Jul 11, 2018


David Spradling

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Sharp Master
  • 11,347 Answers

Possible bad senor

Posted on Jul 11, 2018


5 Related Answers


William Miller

  • 9179 Answers

SOURCE: Maytag,model mmv1153bab,serial #10001847ja,output 1000w

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If you still have trouble, since it's less than one year old, it should be fully covered under warranty. I'd suggest contacting the manufacturer to get it fixed free.

You can find your nearest Maytag-authorized servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Aug 12, 2008


Radames Pagan

  • 196 Answers

SOURCE: Changed the fuse but it blows again

check the horizontal output transistor for short.

Posted on Apr 21, 2010


SOURCE: I have a non-working Intermatic timer motor:

I did ordinary google search for WG-433

looks like $21-33

Posted on Dec 01, 2010

Cindy Wells

  • 6136 Answers

SOURCE: how do change the

Unplug the refrigerator. Remove the lamp cover by lifting up at the bottom of the cover. Then unscrew the old bulb and replace with an identical appliance bulb (Base E12, 240V, MAX 15W, T-20). This bulb is at the top center of the fridge.

The manual is available here: . You will need to review the fridge or enter a code to download the PDF. The light replacement instructions are on page 6.

I hope this helps.

Cindy Wells

Posted on Feb 25, 2011

Jerry Van Sickle

  • 334 Answers

SOURCE: i jump my fan it works fine i change the fan

Hello koral_farver,

One common problem that fits your description is a bad blower motor resistor.

Below i will include an image of the location of the blower motor, removal and installation instructions.

The blower motor resister is under the dashboard behind the glove box.

1. Remove the glove box.

2. Disconnect the connector labeled 2

3. Remove screw labeled 3.

4. Remove the resistor labeled 1.

5. To install reverse order.

With what you have done so far by jumping the fan, installing a new switch and checking the fuses this will but you back in business.


Posted on Apr 17, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Could be in defrost, or control could be bad.

Oct 27, 2018 | Sharp Refrigerators

1 Answer

We have sharp refrigerator. It has 4 doors. The upper refrigerator not working. The freezing down is O.K.

If you wish to get some details about refrigerator repair check the following link ; visit the site linked here. Pull up older posts.

Feb 03, 2017 | Sharp Refrigerators

1 Answer

Hye..recently i just notice my sharp plasmacluster model sj-pt491m-bk the chiller is not working. Not cold as normal. The above freezer working normally. Plz advise

Open Freezer Door Press Door Switch and checked Freezer Fan is working or not.
If fan is working then problem in Ref compartment. If not working then replaced Fan.
In Ref Compartment checked all duct clod air is coming or not.
If not coming then Damper is defective.

Dec 25, 2015 | Sharp Refrigerators

2 Answers

Fan working but no cold air

Electricity, enough Freon, a working fan and a good compressor and you usually have cold air. Maybe the compressor?

May 10, 2015 | Refrigerators

1 Answer

How do I find fuses in my dishwasher?

Bi-Metl Thermal Fuse:
This is a thermal safety device that installs in the console. When the temperature inside the dishwasher gets too high, the bi-metal fuse burns out and breaks the circuit that allows electricity to flow to and from the main electric control board.

Dec 31, 2014 | GE Nautilus 24" Built-in Dishwasher

2 Answers

IFrost Free Sharp Refridgerator & Freezer-Fridge not keeping cold

hello sir/mam
please check the blower of the refrigerator if this is not working the refrigerator wont get cold.

Sep 14, 2009 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Refrigerators Experts

Vernon Taylor

Level 3 Expert

6684 Answers

Brad Brown

Level 3 Expert

18403 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33430 Answers

Are you a Sharp Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides