Hi, this is to ask about my unusual watch behavior. My Tissot Touch is working properly after the battery change. When it's stored in the case the watch's digital function works fine including the analog hands.However, if put into the wrist after several hours the digital's seconds becomes too fast (seconds running double time) and the analog hands stop working. Need your advise, thank you

SOURCE: Tissot T-Touch-Works fine until just about the end of the warranty

I suggest writing to Tissot in both your home country and in the head office in Switzerland. Use both email and paper letters. If you can provide documentation of the attempted fixes that will really help your case. Since you had a history of problems you have every right to ask them to stand behind their product. Perhaps there is a new warranty on the replacement movement, for example. You have nothing to lose except a bit of time, paper and postage. You could even ask your dealer to back you up with this -- he or she will still get paid for the work if Tissot agrees to extend the warranty.

SOURCE: tissot t touch

there are sync instruction on the manual page on the web.

http://www.tissot.ch/data/usersmanual/138-en.pdf

1. Activate the Crystal.
2. Select the "units Mode".
3. Press and hold the "T" until it switched to "syncro" mode.
4. Now using the + and - move the hands to the 12 o'clock position.
5. Press "T" again to set.

SOURCE: Tissot wrist watch goingin reverse since new battery fitted

It sounds like the battery might be in backwards. They do
have polarity,...it DOES matter how it goes in. Try opening it, and
flip the battery to see if that helps.

Mark

SOURCE: Hi guys,

The Tissot Touch watch is expected to need "SYNCHRONIZTION" periodically. (that is, to synchronize the digital and analog portions.) The Tissot manual tells how to do this. This manual came with your watch and is available online from the Tissot website.

good luck, Rodney

SOURCE: The second hand of my Tissot watch T870/970 starts and stops.

Hello!
Absolutely astonished by this "solution" from escapement.
This watch is working perfectly - it is simply giving its "end of battery life warning".