Question about Tefal Kitchen Appliances - Others
WHY DOES THE « E0 » ERROR CODE APPEAR ON THE LED SCREEN? The top major sensor has an open circuit or there is a short circuit. You will need to send this to a Authorised Service Centre for repair.
The sensor is the springy disc in the middle and can be replaced.
Posted on Apr 16, 2019
SOURCE: E0 message
It has a fuser error, needs new fuser, will not just reset when error is present.
The fuser is the hot bit that the paer goes threw to bond the image on the paper, yours has a blown heat lamp or a faulty temp sensor (thermister)
This area is not for playing in cause it is a electrical and fire hazard, just have new fuser fitted and error will be gone.
Posted on Oct 28, 2007
F2-E0 - Shorted Touch Pad (Keypad) - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure.
Select the 'cancel' function and wait 60 seconds.
If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&&&&
Posted on Oct 01, 2010
Tips for a great answer:
Oct 17, 2016 | Tefal Kitchen Appliances - Others
Jun 12, 2016 | Tefal Irons
May 10, 2015 | Kitchen Appliances - Others
Feb 03, 2013 | Tefal Kitchen Appliances - Others
Aug 19, 2011 | Microwave Ovens
Jul 19, 2011 | Tefal 61605 Steam Cuisine Rice Cooker
Jul 03, 2011 | Tefal Food Processors
1,666 people viewed this question
Usually answered in minutes!