Question about The Office Equipment & Supplies
SPL-TXC152A Shredder wont run Checked micre switches and power the circuit board has burn marks on it can i get parts
If I am unsuccessful in locating the replacement gear for my AS1200X, I will joyfully sell you my unit-for parts.
Posted on Feb 24, 2008
I found a way to do a fix that should last for awhile. Put the large gear in a vise leaving room to partially knock the small broken gear through. I used a bolt the same size as the hole in the plastic, and tapped it in about 1/4 inch. This pushes some of the small gear through, exposing more of the usable part of it. I then cut (hacksawed) off about 3/8 inch of the broken part, put it back together and it works!..................Good luck, Sparky
Posted on Dec 15, 2008
The optics are OK!
There is a small electromagnetic sensor on the cuttershaft which senses the input load.
I could be maladjusted or defective.
Posted on Feb 23, 2009
Tips for a great answer:
Apr 13, 2018 | Staples Office Equipment & Supplies
Jan 04, 2018 | The Office Equipment & Supplies
Jan 18, 2017 | Office Equipment & Supplies
Dec 08, 2016 | Shredder Office Equipment & Supplies
Jun 14, 2016 | Staples Office Equipment & Supplies
Nov 24, 2009 | Quartet gbc Shredder, CC185, Gray
Jan 06, 2008 | Office Depot Ativa DQ60M Shredder
311 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: