ALREADY CHECKED THE NETWORK CABLE CONNECTION .
SOURCE: Sharp AR-M450 can't scan to e-mail
Check your primary and secondary dns entry.Also a return admin address is required.
Regards Ed
SOURCE: mx-2300n network error ce-00 when trying to scan
Using Internet Browser access to the Printer/scanner, accessing Network settings, I noticed that the "Connection Test", (below the SMTP Settings), would not go through when SMTP Authentification was set to "ON". Turning it "OFF" allowed the connection test to succeed, but did not change the error code.
However, adding a secondary SMTP Server, allowed it to go through, (leaving SMTP Authentication set to "ON").
Good Luck
SOURCE: Get network error ce-00 on the sharp mx-3501n when
CE-00 means ther is a bad destination entered or the copier is not seeing the server check the IP address
SOURCE: keep getting a e-00 code on a sharp mx 2300n when trying to scan to file via network folder
The code is probably a CE-00 and it means that the copier doesn't detect a active network. Usually means the network cable is not plugged into the copier or the wall or the port in the wall is not active.
17,455 views
Usually answered in minutes!
×