The x-axis on my x52 flight control system doesn't work

How to bring up other e-mail that not opened a while: [email protected] ?

if your X52 is less than 2 years old and you have the receipt, it's under warranty. Call Saitek and they will take it back and fix it (no charge). Mine is more than 2 years old so I am out of luck.

According to the manual you can choose your profile by using the clutch function. Are the profiles that you downloaded of the same file type as the one you have been able to make from scratch?

Saitek has drivers for the X52 on their website.

Here are some direct links.

XP 32bit: ftp://ftp.saitek.com/pub/software/full/Saitek_X52_Flight_Controller_SD6_32.exe
XP 64bit: ftp://ftp.saitek.com/pub/software/full/Saitek_X52_Flight_Controller_SD6_64.exe

If you need further help please let me know.

Hope it helps...

Yes the cable is a PS/2 cable at both ends.
It's a standard one you can get it anywhere, any electronic store, ebay...

Hope it helps...

Remove the calibration you have and re-calibrate it and it will work okay.

You should set this axis up first as a rudder in FSX settings, then calibrate it. Make sure you hav the latest drivers for it too. Make sure that Auto-rudder check box is unticked. I hope this helps, good luck

is the game flight sim x ?

Make sure you have the latest drivers for your operating system and graphics card, including direct X. Good luck

Remove the X52 and drivers from your system. You have to install them in a certain order, so look in the documentation for the correct way to install and you will be okay. Good luck