Question about Sony Office Equipment & Supplies
To reset the lamp timer:
1) With the projector plugged in and turned off, press the 'ON/STANDBY' button to put the projector in 'STANDBY' mode. NOTE: You have to press the button on the projector itself, you cannot use the remote for this step (this is not clear in manual).
2) Now, using the remote, press the following keys in order: RESET, <--, -->, ENTER.
3) Timer should now read '0'.
Posted on Feb 02, 2008
I also have the same problem -- the fix is to replace the optical block ( Internal lamp engine ) which is a $1,100 part. I just purchased a used projector for half the price of the part.
Posted on Feb 17, 2009
According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:
The above sequence should clear the counter.
Posted on Apr 09, 2009
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.
Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Posted on Jun 01, 2009
Tips for a great answer:
Dec 04, 2015 | Sony Office Equipment & Supplies
Jun 23, 2015 | Sony VPL-ES4 Projector
Jul 10, 2012 | Sony VPL-HS51A / VPL-HS60 Multimedia...
Mar 13, 2011 | Sony VPL-ES3 Multimedia Projector
Jun 20, 2010 | Sony VPL-CX75 Multimedia Projector
Aug 19, 2009 | Sony VPL VW10HT Multimedia Projector
199 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: