send the model number,open the door look around the opening where you put the clothes in you should see a tag there.if you unplugged it and it worked then it's not any of the t-stats or door switch most likely a board issue or something to do with the cord from moving it,when you unplug it and plug it back in your resetting the board so this is what it sounds like but can't tell if you even have a board without model number.

Jan 14, 2018 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore Elite Smartheat QuietPak9 dryer quite blowing hot air.

Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.

if you dryer is gas check out this gas no heat tip....

If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.

check out this electric no heat tip...

heatman101

Jan 06, 2011 | Kenmore Dryers

1 Answer

My kenmore elite Smartheat quietpak9 model HE4, keep turn off after 15 to 20 minutes, it does getting hot. Could you please let me know what will be a problem. I bought it used so I am not sure how old is...

might need a clean out keeping heat inside of dryer,or you have abad motor,take the vent line off the back of dryer and run it to see if the block is in the vent line or in the dryer,also take off bottom panel,unplug dryer,take out lint filter and then remove the duct that the filter slides into,if it's blocked clean it out and you should be all set,usually the thermal fuse pops when this happens so that's why i say you could have a bad motor

Dec 15, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Burn marks on clothing

replace felt seals on drum

Feb 02, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore smartheat.quietpak9 he4 mod.11085088401 wont start

try this,,,press pause /cancel botton twice

Jan 05, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Gas dryer wont heat

You may have a blockage somewhere in your exhaust line. I had to have my professionally cleaned, but it fixed the problem.

Dec 11, 2008 | Dryers

5 Answers

Kenmore Elite HE4 - Smartheat Quietpak9

Dryer heats but will not dry clothes. Uncloged linted in screen and where the tube is. Did not fix the promblem. Could it be the heating element? And if so what is the cost to replace it?

Nov 15, 2007 | Kenmore Elite HE4 Electric Dryer

1 Answer

Dryer won't start

Manual might be available on line type in your make and full model. Could well be the bulb that blew. Sounds like the door switch thou i see by other postings some times the filters can cause a similer problem
GUEST. 1. start switch is faulty...oops is it eletronic?it so disregard that. 2 drum is to tight 3 motor or switch on motor faulty
smitty123. Will drum turn by hand??? Can you hear the motor hum when you close the door???

Oct 27, 2007 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?

View Most Popular

Dryers

I have a Kenmore Elite HE4 smartheat quiet pak 9 that has power but will not start.

Kenmore Elite HE4 Electric Dryer

Open Questions:

0 Answers

Model 796.91073310. How can I disassemble to gain access inside for repair?

Jan 17, 2021 | Kenmore Dryers

0 Answers

Model 110.85861400 Elite QuietPak HE4. It starts, but why then nothing? It turns on, lights up, clicks & beeps when the start button is pushed, but it does nothing.

Jan 12, 2021 | Kenmore Dryers

0 Answers

My kenmore elite cooktop "red dashes" on all heating elements Tried to depress lock for 10 seconds, nothing....no heat

Jun 08, 2019 | Kenmore Dryers

0 Answers

need to know where the fuses are located on the Kenmore model #970C503730

May 26, 2019 | Kenmore Dryers

Ask a Question

Usually answered in minutes!

Have a manual for Kenmore Dryers? Or just drag it here!

I have a kenmore elite smartheat quietpak9 HE4 and it's not heating up and dryikng clothes. It's starts up just fine and spins but doesn't heat up!

Add Your Answer

Attachments: Added items

Related Questions:

I have a Kenmore Elite HE4 smartheat quiet pak 9 that has power but will not start.

What should be the resistance be on the Thermistor unit? Our unit is working normally except no heat, heating element, thermal cut-out, and hi-limit all read correct resistance. Thermistor has no...

Whirlpool made for Sears (Kenmore) HE4 Elite SmartHeat QuietPak9 will not respond to commands, eventually puts 20 on the time screen and the lint light comes on, won't start, won't run, checked...

My Kenmore Elite Smartheat QuietPak9 dryer quite blowing hot air.