I took my pictures from a scan disc to the computer now i cannot find them

when you put your disc into the disk drive let it load then close it down,then open your computer icon were you find your local disk drive or it may come under (my computer)in there you will see the the drive were your disc is located just right click on it and tell it to format the disc.

Corrupt disk.

How do you normally download your pictures?

If you do it by connecting your camera to your computer, simply remove your memory card before making the connection. If you do it by putting your memory card into a card reader, first use the "Copy to Card" command in the playback menu to copy the pictures from the camera to the memory card.

Try to fix the 1200 error first. The error indicates that the cartridge carrier has stalled. Please refer to this article to fix the problem: 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One. Once your cartridge carrier is functioning properl, re-insert your cartridges - How to Install Ink Cartridges In Lexmark X4200 Series AIO.

You can download the Lexmark X4270 driver by visiting the Lexmark website at http://bit.ly/gKXn7F. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

For your scanning concern, especially when scanning documents, you will need the Lexmark OCR scan software to do the job. The scan software is available only on the installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for additional assistance.

Hi ginuzoe,

Apparently your scanner isn't being propperly recognized by your PC. To fix this issue install the latest version of the driver of your scanner. This can be done by using the set-up disc that came with the scanner or by looking for the drivers online at the official page of the brand.

Hope this helped.
-Luchen

DOWNLOAD "IMAGE RESCUE 3".

GOOGLE IMAGE RESCUE 3 ,WHEN IT SAYS,RUN OR SAVE,
SAVE IT IN MY DOCUMENTS, CLICK ON IT TO LOAD PROGRAM ON
COMPUTER.USE CARD-READER, PUT CARD IN WHEN ITS PLUGGED INTO COMPUTER.
RUN IMAGE RESCUE 3 YOU SHOULD SEE WHERE TO SCAN
FOR IMAGES.
ALWAYS FORMAT CARD AFTER IMAGES HAVE BEEN REMOVED
DO THIS IN CAMERA NOT CARD-READER.
BURN IMAGE RESCUE 3 TO DISC YOU ALWAYS HAVE PROGRAM.

It probably won't work. The systems on the cameras are different. You may even corrupt the card in the process.

eject the disc, then press the stop button for 5 seconds and it will turn off progressive scan.

Its easiest to transfer the pictures to a usb drive or sd card and insert them into frame and copy them to the internal hard drive. Using Mac OS X Snow Leopard v10.6.2

Downloaded disc to computer, computer tells connection can not be astablished. When I check the computer evrythings in there. I also took everything out and reloaded it. Computer isn't old and I have window xp. Help me please.