I'm looking for a manual/operation instructions for a RoboToolz laser level. The company was out of Mountain View CA. Phone # doesn't work.

If you've replaced the batteries in your Robotoolz laser level but it still won't turn on and the swivel mechanism isn't functioning, there could be a few potential issues causing the problem. Here are some suggestions to troubleshoot the issue:
1. **Battery Polarity:** Double-check that you've inserted the batteries with the correct polarity (+ and -) as indicated on the device. Sometimes, incorrect battery placement can prevent the device from turning on.
2. **Battery Contacts:** Ensure that the battery contacts are clean and free from corrosion. Use a clean cloth or a cotton swab to clean the contacts in the battery compartment.
3. **Battery Compartment Door:** Make sure the battery compartment door is securely closed and latched. Some devices have safety switches that prevent operation when the door is not properly closed.
4. **Reset:** Some laser levels have a reset button or procedure. Check the user manual for your specific model to see if there's a reset function you can try.
5. **Calibration:** Some laser levels require calibration before they can operate. Refer to the user manual to see if your laser level requires calibration and follow the provided instructions.
6. **Electrical Issues:** If the laser level was exposed to moisture or extreme conditions, it's possible that internal electrical components might have been damaged. In such cases, professional repair might be necessary.
7. **Mechanical Issues:** If the swivel mechanism isn't functioning, it could indicate a mechanical issue. Check for any obstructions or debris that might be preventing the swivel movement.
8. **Professional Inspection:** If you've tried the above steps and the laser level still won't turn on or function properly, it might be best to seek professional assistance. There could be internal components that need repair or replacement.
9. **Manufacturer Support:** Contact the manufacturer's customer support for guidance. They might be able to provide specific troubleshooting steps or recommend a repair service.
Keep in mind that laser levels are precision instruments, and improper handling or disassembly could lead to further damage. If you're not comfortable troubleshooting or repairing the laser level yourself, it's best to seek professional help to avoid causing more harm to the device.

contact the maker direct

http://robotoolz.ru/laser-tools/

Catalogue, but no manuals. There are manuals for similar devices though.

https://www.google.com/search?q=robosquare+3+point+laser+level+manual

..

Ask here if they will look at it?

https://www.tek.com/en/calibration-by-manufacturer/robotoolz

Some videos that may help.

https://www.google.com/search?q=robotoolz+laser+level+repair

..

Page 18?

https://www.manualslib.com/manual/1314734/Robotoolz-Rt-7690-2.html

ROBOTOOLZ RT-7690-2 USER MANUAL Pdf Download ...

https://www.manualslib.com > ... > RT-7690-2

View and Download RoboToolz RT-7690-2 user manual online. Self-leveling, remote-controlled, simultaneous level and plumb rotational laser system.

Or contact the maker.

Contact a laser service center. I doubt anyone will be willing to work on it. It would be a lot of research for a 2.00 part. Usually you will be unable to find parts for big box store lasers. A laser dealer may have a broken one laying around that he can pull a used part from. Just a a precaution I'd recommend never purchasing a laser from a retail store such a sears or home depot. If possible go with a Leica Geo-systems unit. Topcon, spectra physics, and trimble are also good lasers that have all parts readily available. In the service industry we call cst, bosch, robotoolz, "throw away lasers" because if anything at all goes wrong you throw it away. If i recall properly I have searched for parts for Robotoolz and contacted the manufacturer in the past. I was told that they are not supported and parts are not available. Check around and see if you can find a service center with a used part. Google search (Leica Geosystems, Topcon, Trimble Laser dealer).

Try contacting them at:

404 Villa St
Mountain View, CA 94041
Phone:(650) 903-4944
Fax:(650) 903-4949

ROBOTOOLZ. INC.

ROBOTOOLZ. INC. was a corporation registered in the state of California.

It was a domestic corporation, meaning it was formed, as well as registered, in California. Its articles of incorporation were filed on June 18, 1998.

All of ROBOTOOLZ. INC.'s powers, rights and privileges in the State of California have been suspended. This could have happened because they failed to file a return and/or pay taxes to the California Franchise Tax Board, or because they failed to make certain informational filings with the California Secretary of State. The specific reason for this suspension can be found by ordering a status report from the Secretary of State.

ROBOTOOLZ. INC. was a for-profit entity.
Sorry, looks like you are too late! Mailing Address

670 White Plains Road
Scarsdale NY 10583
President

Abbott Stillman
670 White Plains Road
Scarsdale NY 10583
Registered Agent

Gary Adams
611 Iris Ave 41
Sunnyvale CA 94086

Here is a website of a company that repairs :
www.prontotech.com

You must place the unit 30' from a wall, level the unit with the level indicating vials, mark spot on wall or object, rotate laser 180 degrees and level with vials again, if it comes to the same spot your unit is calibarated. if not then you must do this process at least 2 times(1 for each directional level) and use the adjusting screw to move vial. it takes a while to get it right.