What is the blue light on the controls of my go chair when in motion

ebay, site thefind.com Mfg site.

This chair is assabley required but almost anyone can but them together

No the chair has to be assembled

The hand control could be the problem. Make sure you did not accidentally cut through the cables in the lift mechanism.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Most likely the hand controller from what I see of the reviews..............

Most probably the hand controller from what I've read call Home Meridian...........

hi let me see if i can help ,

When the lights go back and forth on your joystick that means the chair knows its pluged in .Now the chair itself has a built in charger that is mounted on the back of your chair .The back of the chair ,there is a opening a cutout in the frame .when you plug in your chair there will be a red light and a yellow ,yellow means the chair is charging, wait till it turns green,this means fully charged.When you plug in the chair youll see the lights through that hole.Look for the lights.

I recommend my customers to leave there chair charging over night look at the light it will be green when you turn the chair on the joystick should show fully charge.


Good luck hope i was of some help.

Sounds like your motors are gong out. You`ll need to get to a reputable dealer for further diagnosis.