Ice Cream Makers Logo

Related Topics:

Question about Taylor Ice Cream Makers

1 Answer

I have a taylor ice cream machine thats keeps a constant beep even when ice cream is ready model 339-27

Posted by RYAN SENSENIG on

Ad

1 Answer

vince

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,311 Answers

I'm not 100% on this model but here goes....
A "beeping" tone will sound to alert you
of a fault.
To discontinue the tone, access the Operator
Menu and enter Option B. Correct the fault, then press
the OFF (<--) key, and the tone will stop.
FYI Fault Description
(Option B)
This option lists any faults detected by the control and
allows the operator to clear them from the system.
When a fault is detected it will be displayed on the
second line of the LCD. Pressing the MENU/SEL key
will display the next fault found or return the display to
the Operator Menu if no additional faults exist. If the
OFF key is pressed when a fault is displayed, all faults
that have been corrected will be cleared from the LCD
upon returning to the Operator Menu. To return to the
Operator Menu, press the MENU/SEL key.
for 337.....
Screen display.....
The POWER SWITCH OFF screen indicates that the
power switch is in the OFF position.
POWER SWITCH OFF
=- -=- -=- -=- -=- -=- -=- -=- -=- -=
The normal operating screen will display the current
mode of operation and the level of mix in each mix
hopper. (The power switch is in the ON position.)
MODE: OFF
MIX:
L = OK
Operator Menu
_________________________________
The Operator Menu allows the operator to access
operational information and to set non-critical
functional parameters. The Operator Menu also allows
access to the Service Menu. (Note: Only service
technicians who know the access code may use the
Service Menu.)
Operator Options
A
Exit From Menu
B
Fault Description
C
System Information
D
Current Conditions
E
Service Menu
Pressing the OFF (<--) key will move the cursor one
position to the left. Pressing the STBY (-->) key will
move the cursor one position to the right. Both keys
include the "wraparound" feature. This means that
when the cursor reaches the end of the option, any
further movement in the same direction causes the
cursor to "wraparound" (to be placed at the opposite
end of the option listing)

here's the manual if you don't have it....


http://www.taylorfreezersales.com/op_man/0337op0.pdf

Best to you hope this helps a little

Posted on Mar 05, 2018

Ad

5 Related Answers

SOURCE: TAYLOR 632-33 ICE CREAM MAKER

If you are wiring a Taylor machine to three phase power and you have a "wild leg" or "high leg" you must place the high voltage leg on L3. This will keep the higher voltage out of the control circuits of the machine. To clarify what a high leg is, it is created in three phase applications where a certain type of transformer is used. It creates two normal power legs, 110-120 and one leg that is only useful with another leg of power. If measured to nuetral or ground a wild leg will measure considerebly higher than the other legs. Hope this is helpful

Posted on May 02, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Spares for Taylor 8756 ice cream machine

looking for 777 741 770 beater blade

Posted on Feb 22, 2010

Anonymous

  • 1 Answer

SOURCE: I have a Taylor PH71-58 ice cream machine could

access code is 8333

Posted on Nov 19, 2010

Testimonial: "Thank you for the access code to my ice cream machine, this will help me a great deal."

Anonymous

  • 4 Answers

SOURCE: taylor soft serve ice cream machine model #y754-27

If you need parts go to softserveparts.com tell them shaun sent you.

Posted on Feb 21, 2012

jcasillas90478

Jorge Casillas

  • 8 Answers

SOURCE: Taylor 8756 ice cream machine clogs at face

First check your blades if they are worn out the machine will ice up in chamber and the unit will have a hard time dispensing.Then if blades ok check your mix is it plenty or lacking sometimes customers wait to sell all ice cream not reallizing that this will affect product qualityand unit will freeze up too much giving you problems.

Posted on Aug 16, 2015

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a taylor ice cream machine (DQ) model 8756. new at this. getting constant beeping and no idea why. can you help?

Since you didn't report any other problems, I am going to assume the machine is working otherwise. In that case, it is usually a bad logic board. Since the left and right side logic boards are the same, you could swap the two boards and see if the issue follows the board.

Most people will order the logic board and replace it themselves, avoiding a service call.

We have reconditioned logic boards available here.
http://www.softserveparts.com/i-26471526-x36641ser2refurbished-gen-2-logic-board-this-item-is-sold-with-exchange-only-you-must-return-the-no.html

We have new logic boards available here.
http://www.softserveparts.com/i-26471706-x69571-ser2-logic-board-gen2.html

I would be happy to put a technician on the phone with you for this issue or any in the future. 1-800-879-7839
repaired_logic_board-2kpess4wewvn2j0isvncg3k1-2-0.jpg
0helpful
1answer

Owners manual taylor ice cream model B741

For Taylor ice cream machine maintenance, please see our Support page or our Youtube channel. Providing ice cream equipment maintenance to you for free!

Ice Cream Machine Support
0helpful
1answer

Manual and guide for Taylor ice cream machine model 8756-33

For Taylor ice cream machine maintenance, please see our Support page or our Youtube channel. Providing ice cream equipment maintenance to you for free!
Slices Concession
0helpful
1answer

Taylor 710-27 ice cream machine top not cooling

For Taylor ice cream machine maintenance, please see our Support page or our Youtube channel. Providing ice cream equipment maintenance to you for free!
Slices Concession
0helpful
1answer

Owners manual taylor ice cream machine model 8756-27

For Taylor ice cream machine maintenance, please see our Support page or our Youtube channel. Providing ice cream equipment maintenance to you for free!
Slices Concession
1helpful
1answer

I need pice from 339-27 ice cream mashin

Dear friend, Well if you are planning to buy an ice-cream machine.i can provide you a few links.
for 339-27 ice cream mashin 1)http://shop.ebay.com/sis.html?_nkw=TAYLOR+339+27+SOFT+SERVE+ICE+CREAM+MACHINE+AIR+COOLED
2)wvw.lucantoniblanz.tk/taylor-339-27-ice-cream-machine
3)http://www.fashioninpassion.com/index.php?jeans=simac+il+gelataio&pj=67167


Price:$2392.0 - Taylor Soft Serve Ice Cream Machine Model 339-27 for the 3rd website
the cost is ranging from $1,995.00 to $7,500.00 (cost on ebay.com)

the below link will guide you in a more better way.

http://shop.ebay.com/sis.html?_nkw=Taylor+754+33+Soft+Serve+Ice+Cream+Machine+Air+Cooled
Buy It Nowor Best Offer $7,500.00
0helpful
3answers

TAYLOR ICE CREAM MACHINES SPARE REQUEST

Get rid of this unit it is too old to repair.
Not finding what you are looking for?

2,242 views

Ask a Question

Usually answered in minutes!

Top Taylor Ice Cream Makers Experts

vince

Level 3 Expert

1307 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19165 Answers

Are you a Taylor Ice Cream Maker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...