All lights are blinking, what is this for an error? Krups model 8108

The blinking yellow-green and solid red light on a coffee machine typically indicate an error or problem with the machine. Without more specific information about the make and model of your coffee machine, it is difficult to say for sure what the problem is. However, here are some common issues that can cause a coffee machine to display these lights:

Blinking yellow-green light: This light may indicate that the machine is in a warm-up or preheat mode.

Solid red light: A solid red light can indicate several different problems, depending on the machine's model and brand. Some common causes of a solid red light include a low water level, a clogged or dirty brew head, or an issue with the machine's heating system.

It is recommended to check the user manual for your coffee machine to determine what the specific light sequence means and how to address the issue. If you don't have the manual, you may be able to find a copy online by searching for the make and model of your machine. If you are unable to resolve the problem, you may need to have the machine serviced by a professional.

Here's the parts diagram. You should be able to find it and order it here. https://www.searspartsdirect.com/model-number/wfc7500vw1/1198/0153200.html?sid=ps:GOOGLE:Dynamic%20Search%20Campaign%20-%20Categories:whirlpool:&k_clickID=bc276823-c73d-402e-8108-8dca92f89665&gclid=CjwKCAiAnabTBRA6EiwAemvBd9ZcgjLmZK2G078ABQNcyGMj1_hA2h07z9UCh0fNoaGyjVBYHsWyyRoCLgEQAvD_BwE&kenibpid=p.590.bc276823-c73d-402e-8108-8dca92f89665.cr368030

You will probably get some proper help if you identify the exact model. I don't expect "error 2" to mean exactly the same on every model Krups have ever made, narrow it down a bit for us please.

The error code may be different for different models, you need to supply more info when asking questions, the brand is not enough, Krups have made hundreds of coffeemakers.

if i under stand it looks like you may have an error but i need more info and model every machine has it own history

If the lights are on/blinking, that usually means that the control board is OK, and it's the power supply that is not providing sufficient power for the cooling element to operate. This is a common issue with the Krups VB 5020 series.

I just got a tip from Sherwood tech support on resetting my Sherwood receiver, and it solved my problem perfectly. It's not the same model number but here's what I did: Put the receiver on Standby. Press and hold the Setup button for 3 seconds. When you see the model # on the display, press Enter. The word "Cleared" should show on the display. Hope it works for you also.

When i plug in Model#age 15 1100 eo the 8's start blinking but will not allow any water to filter throughcoffee grounds. Any suggestions/ I also thought Krups was a good procduct, but I've had it for one year and it stops working.