When trying to initialize the card it just says card error

https://www.manualsdir.com/manuals/136661/sato-cl408e.html?page=100

Free manual at link shown above:

Card R/W Error
1. No card is inserted.
2. Card is write protected.
3. Invalid store/recall
number.
4. Card has not been
initialized.

ERROR LED: On
Audible Beep: 1 long
Display: Card R/W Error
Printer must be powered off
to reset.

1. Insert card into selected
slot.
2. Remove write protect tab.
3. Correct program
4. Initialize card with BJF
command

Assuming that you want to benefit from a Windows system that is errorless and facilitate your ability to repair 0x80029c4a idm error then I believe that you're going to find the help you need. I'm familiar with what you feel right now about your Windows because I've gone through a similar position. I have no idea how frustrated you are at this time with your operating system, nevertheless, let me guarantee that this will change in just a few minutes.

Click here to repair 0x80029c4a idm error now!

Getting satisfaction when talking about your Windows, is mainly based on how well you look after it from the start. PC errors can arise because of a variety of causes; it'll require only one solitary contaminated file to initiate a large assortment of faults. By all means, the most basic fix is taking your PC to a computer shop, but it's anyone's guess about how steep the expenses will be. Currently, what I am extremely thrilled about is using an innovative repair program that assists me to easily handle most PC complications.

When utilizing this tool, you'll never have to evaluate Windows errors again and exhaust your energy on the Net striving to uncover what their explanations are. Once initialization is complete, it will start to review every bit of your full Windows system and take care of any identified glitches, saving you from a lot of stress. An important solution that is included is an in-depth report that lists all of the problems, that even those lacking system skills will be able to follow. Alternate methods are being offered that claim to achieve equivalent effects, nonetheless, I know that this one fits my demands well.

So that you don't blow more time searching the Net for help to repair 0x80029c4a idm error, try my tip and determine how it will support your laptop/desktop. PC errors don't just happen, something always initiates them, and a huge test is to determine and learn the starting point. Seeing that there are hundreds if not thousands of Sites discussing PC issues confirms how sensitive operating systems are. So that your other systems aren't vulnerable, be sure to perform a Windows registry diagnostic on each of your systems; you'll be surprised with the issues it'll identify. Hopefully my assistance I've provided helped you to repair some of the hassles that you've experienced up to now with your Windows.

It sounds like your SD card has become corrupted. Have you ever formatted it in your camera? If the answer is no (or you didn't know that it needed camera formatting), then this is even more likely the problem. A new unformatted card will initially work fine in the camera, but with time they nearly all will corrupt.
You'll need to format the card in the camera, using the camera's format option to rejuvenate the card, and to prevent this from happening again. However, this will erase any photos that are already on the card.
If you want to recover the photos first, here's some Mac freeware from CNET. You'll need to use a card reader with this software. Also if you have problems with this software, there are other "non-free" options available at CNET.
Good Luck!

Just format your card once your problem will be solved

I had the same problem and find the answer on other forum http://forums.crackberry.com/f85/huge-problem-about-initialization-failed-sos-113323/ I used some scotch tape and worked perfect for me, the idea is to make the sim card a litle "fat" to fit the contacts.

Good luck

MY GUESS IS THE NORTH BRIDGE ON MOTHER BOARD IS BAD, REPLACE MOTHER BOARD.

I solved the reset by pressing the air dry and reset buttons 6 times in sequence, the whole panel array lit and I was then able to reset. I have had no problems since and have used it 6 times. I initially thought that the chipset had a volatile memory and took out the control card and checked all sensors, the falut persisted and I was so close to scrapping the thing !
We have had a few hydro outages here recently, I guess this put the machine out of sequence and it would not reset. I recommend that if you have a similar problem try pressing the buttons one after the other within 6 seconds, I guess similar machines with a slightly different touch pad use this means to unlock too so play with it for a while!

My guess would have to be a hard drive malfunction. But Sony has a few things to try out. Here is the link to the page with possible solutions for any code starting with 800.

http://tinyurl.com/49hdxu

Hope this helps. Thanks!

Get the photos you want to keep off the card, and reformat it in the camera. Just deleting pics won't help. More than likely corrupted memory, and needs reformatting, Has worked for me several times.

I had a similar issue with an XD card in my Fuji FinePix S3000.

I had used the several times for a couple of years without problem.

The issue appeared right after dowloading pictures from the card inserted in my notebooks' card reader - an operation I have done several times in the same notebook without any problem.

I have fixed the issue going to Menu, Option, SetUp, Format and choosed OK.

Deleted all the pictures (make a copy before if the card is readable in the pc as it was my case) but made the card readable again.