Kitchen Ranges Logo

Related Topics:

R
Raoul Harmon Posted on Feb 27, 2018

8 yr old Whirlpool Accubake electric range. A few days ago, we tried to bake something but the broiler element came on and stayed on. Same in all modes. Tried throwing breaker but no help.

3 Related Answers

Anonymous

  • 750 Answers
  • Posted on Dec 11, 2008

SOURCE: Broiler element Whirpool Accubake electric oven not working

Hello
Welcome to Fixya
My name is Huum,

You need a new top element

http://www.pcappliancerepair.com/model-display.php

You can find the diagrams,schematics, and parts for your range at this site

Please remember to leave a rating before you leave

Ad

Anonymous

  • 89 Answers
  • Posted on Oct 09, 2009

SOURCE: Broiler element stays on. I had to trip the

a wire in the back of your stove is grounded... open rear panel after unplugging and look for burnt wires going to the element. the wires will be a higher grade than most..
most likely there is no problem with the broil element itself, but the problem could possibly be located in the oven switch (if it is not digital)

Lawrence Oravetz

  • 10558 Answers
  • Posted on Oct 17, 2016

SOURCE: When baking in whirlpool accubake electric stove model GR475LXMS only the broiler works not bottom element what could be wrong?

The element could be open or the thermostat for the oven could be stopping power from reaching the element

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

When baking in whirlpool accubake electric stove model GR475LXMS only the broiler works not bottom element what could be wrong?

The element could be open or the thermostat for the oven could be stopping power from reaching the element
0helpful
1answer

How do you remove the moulded Hidden Bake Element from the inside whirlpool ceramic range accubake system

first, remove power from the unit before doing ANYTHING! second, remove the back cover of the machine, this will expose another smaller panel with 4-6 screws in it running along the bottom edge across the back. after removing the screws you will have to gently BEND the panel down until you can see the wiring leading to the hidden bake element. cut the insulation covering the back of the element... be sure new element is placed in the exact location of the old one to avoid shorting the bake terminals to the metal cover, then reverse the removal process...
0helpful
1answer

Whirlpool Range #RF114PXSB , both bake and broiler elements won't go on

If the burners have the same problem check your power, it sounds like one of the phases is out. There is a common wire to both units, it is aparently open.
0helpful
1answer

My Whirlpool Accubake oven will not work in bake mode, however the broiler works fine.

Take out the lower element from the oven, take to an appliance parts house, ask them to test the element - if the element is bad, they can sell/order you a new one...
If your element is good, you probably have a wiring fault. HAVE A PRO find this - beats waking up to a house on fire.
Hope this helps...
0helpful
1answer

Whirlpool accubake sf367lxsq top burners work oven and broiler don,t work

You need to check for continuity between the bake relay output terminals and the broil relay output terminals. If the bake/broil function is supposed to be on and there is no continuity, your board must be replaced/repaired. The company I work for, ApplianceTimers.com can repair your failed board. If there is continuity, you have a shorted external wire(s) or element.
0helpful
1answer

Lower heating element will not heat up

check the element for continuity if there is continuty on the element then you need to replace the electronic control. you can also take the two wire from the bake element and move them up to the broiler element and try to turn on the broiler using the bake button this will confirm bad board or element.
make sure to unplug the unit will doing the wire change and then plug it back in
0helpful
1answer

Broiler element stays on. I had to trip the

a wire in the back of your stove is grounded... open rear panel after unplugging and look for burnt wires going to the element. the wires will be a higher grade than most..
most likely there is no problem with the broil element itself, but the problem could possibly be located in the oven switch (if it is not digital)
0helpful
1answer

I have a 4 yr old kenmore glasstop electric range. Problem exists with the broiler as it comes on when I set the oven to bake.

this is normal
about 8 years ago manufactures started to include the broil element in the preheat cycle to heat the oven faster
it should cycle down once the set temp is reached
0helpful
1answer

Broiler element Whirpool Accubake electric oven not working

Hello
Welcome to Fixya
My name is Huum,

You need a new top element

http://www.pcappliancerepair.com/model-display.php

You can find the diagrams,schematics, and parts for your range at this site

Please remember to leave a rating before you leave
Not finding what you are looking for?

53 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...