Replacement Vacuum Cleaner Battery for Dyson V8 Absolute
If you need this battery, yo can go to view it first at http://www.drill-battery.net.au/buy.php/dyson_V8+Absolute_battery.html
Not trying to be a smart a** but which of the two do you have?
1. A flashing blue light indicates that the battery is running low on charge.
2. A fast flashing blue light indicates no power or a temporary fault (e.g. check filter or for blockages).
FYI....A solid blue light indicates that the battery is charging. No light indicates the battery is fully charged. A solid amber light indicates that the battery is not charging due to a temporary fault (e.g. too hot/cold). A flashing red light indicates that there is a fault, call the Dyson Helpline.
Best to you.
SOURCE: Dyson 17 Brush Belt Broken
there is also an updated beater bar that accepts a wider belt, dyson sent it to us for free
SOURCE: Belt on turb0 head is slipping
Just buy a new belt from a domestic appliance spares store or online store and replace the old one.
SOURCE: my dyson dc 16 hand held vacume stops & starts
Cutting out can be due to a few things , motor overheating due to dirty filter, Faulty mains cable or plug..sealed type also..Faulty Switch/trigger.May need to seek pro help to fix.
SOURCE: I got a Dyson DC16 handheld cordless.
i have posted a fix on here ,,, its the magnetic transistor sensor on the pcb,,, common fault found the fix today...remove it and solder 1 wire from a+c on my diagram,,its at the top of long board that sticks up into a cavity off the main pcb..behind the serial number,,
remove it and solder a wire...like this
A
B C
SOLDER WIRE TO A + C AFTER REMOVING THE TRANSISTOR.. RIGHT AT THE TOP GUYS OF THE PCB... FIXS IT 99% OF THE TIME PROVIDING U KEEP IT CLEAN,
LET ME KNOW ALL WHO FIX ...CHEERS SAY THANKS,
SOURCE: i have a dyson dc16
it needs charging . and if the lights dont light when you put it in the charger somthing is wrong with charger or battery
1,648 views
Usually answered in minutes!
×