Question about Electric Health & Beauty

1 Answer

Hi I have a electric wheel chair merits P313 two new batteries and joy stick having 2 of 6 middle lights blinking at fast rate.

Hi I have a electric wheel chair merits P313 installed two new batteries and joy stick having 2 of 6 middle lights blinking at fast rate,machine does not move at all,could someone help me troubleshoot what may be wrong?thanks,Rui

Posted by Rui Brandao on

Ad

1 Answer

Terry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Electric Master
  • 11,377 Answers
Ad

2 Related Answers

HoverTech

Donna Angelo

  • 232 Answers

SOURCE: Merits DL 52 i electric wheel chair, all leds flash 3 times.

The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Posted on Oct 20, 2010

Ad

magna buff

  • 3828 Answers

SOURCE: I have a merits p313 electric wheelchair stop working put in new batterys the controler lights all blinking then just middle yellow blinking

have lights so not fuse blown
not much to these ..batteries .. controller .. electric motors
hard to mix up the positive and neg terminals
that is a two battery unit


check if the joystick controller or its cable is faulty


26224466-4bf0e540izdtgis0rljlprak-4-0.jpg

26224466-4bf0e540izdtgis0rljlprak-4-1.jpg

Posted on Jun 24, 2016

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a controler for a merits p313 electric wheelchair


Monster Scooter Part sells the controller for $400. Installation is straight forward once the controller is located under the shroud cover. Remove the 2 mounting bolts and unplug the wiring connectors. The Shark controller connectors are easily removed by a squeeze or pull back on the lock ring. Hope this helps.
http://www.monsterscooterparts.com/mobility/mobility-brands/mehepr/metrrep33/controller-merits-atlantis-2-cypress-regal.html

Jun 26, 2016 | Electric Health & Beauty

1 Answer

I have a merits p313 electric wheelchair stop working put in new batterys the controler lights all blinking then just middle yellow blinking


have lights so not fuse blown
not much to these ..batteries .. controller .. electric motors
hard to mix up the positive and neg terminals
that is a two battery unit


check if the joystick controller or its cable is faulty


26224466-4bf0e540izdtgis0rljlprak-4-0.jpg

26224466-4bf0e540izdtgis0rljlprak-4-1.jpg

Jun 24, 2016 | Electric Health & Beauty

1 Answer

How to reset manual brake control and where is it.lights go on( 2 red & 2 green) but jet joy stick is so touchy lights blink and I have to restart it.


If the joystick turns completely off when you try to drive it means the batteries instantly are dropping voltage below the operating capabilities. I have also seen bad connections in the battery wiring harness cause the same thing.

Sep 15, 2014 | Pride Mobility Products New Pride Mobility...

1 Answer

Merits power chair codes


I Have a Merits S-142. I just purchased an installed 2 new batteries, my problem is the Red light stays on even after 18 hrs of charging. Also when I turn the Key on NO lights come on. I checked the fuses and the all look OK. Can you please help me Mike

Jan 31, 2012 | Electric Mobility 24 " Seat Merits Heavy...

1 Answer

I had not used the chair in 2 months, when i charged the battery in my electric wheelchair, the lights near the top of the joy stick shows its fully charge, but when i unplug the cord, it go's...


Yep It sure does Why didn't you charge the chair for 2 months? Charge at least once a week if you don't use it daily. Always break in the new batteries by using the chair daily for 10-15 days charging everynite then charge once a week if it sits for that long without use. Always put up fully charged. Do this and your batteries should last 3 -4 years Charge overnite if you use daily and never charge more than 24 hours Good Luck

Nov 15, 2010 | Electric Jazzy 1115 Power Wheelchair

1 Answer

Merits DL 52 i electric wheel chair, all leds flash 3 times as a error code. Battery is fully charged, then turn on wheelchair. All led are on. then when the joy stick is pushed, all leds flash 3 times...


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Jul 15, 2010 | Health & Beauty

1 Answer

Merits wheelchair has a dynamics d l 4.2j controller


Hi. You say that the lights blink? Do all the lights blink, or just some. If its just a few then it is probably a fault code. Count how many lights are flashing and let us know and I will be able to look it up. Do you have either of the motors in free-wheel. The brake units have small micro-switchs on them, and the controller will not operate in either switch is on. Also check all battery and motor connectors. Good luck. Neil.

May 26, 2010 | Electric Health & Beauty

3 Answers

I have a quatum 610 power chair when i use it the batterys (new) discharge fast i get about 2 miles per charge it makes a clicking noise but not all the time and even makes the clicking noise after its...


It is not shutting off. You need to bring it to an expert for service. Your problem sounds like it is electronic, not mechanical.

To stop it from discharging you can disconnect the batteries. The batteries should be hooked up in series 24vdc not parallel 12vdc.

May 16, 2009 | Pride Mobility Products New Pride Mobility...

1 Answer

The charge lights blink and the chair won,t go.


Just had this problem with my Guardian Aspire. They had to replace the electronic box with the joy stick. BIG BUCKS!

Mar 12, 2009 | Jet Health & Beauty

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers

barrybam

Level 2 Expert

208 Answers

jws1013

Level 3 Expert

1708 Answers

Are you an Electric Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...