Its when the Shift attempts to pull out of gear, but the Gear Position Sensor indicates that the transmission was unable to disengage that gear. and detected a system failure, and unable to detect the cause.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks
you need help from service and repair manual which will help you to remove the code easily and to get the manual go to the given link http://toolsnyou.com/
Most codes require a scanner to clear, if they are minor codes normally they will reset after several restarts of the engine. as long as the codes does not still exist.
Hi I had the same problem with my 2012 Kenworth t660 with a paccar mx 13 engine... What u need to do is replaced the EGR delta pressure sensor , i bought mine for 170
The codes are typically stored in the computer which controls the particular circuit it controls and unhooking the battery cable does not reset the codes.
aka ring of death, this means there is a mainboard fault of somekind. It will need to go back to MS for repair, you will have a 3yr warranty on the console, call the below to get a pickup arranged. good luck
Assistance by phone:0800 587 1102 or +44 20 7365 9792 from a mobile phone Hearing Impaired (TTY device): 0800 587 1103 Hours of operation: Monday-Friday: 09:00-22:00 Saturday: 09:00-20:00 Sunday: 09:00-17:00
×