Belling double oven turning my home and paintwork yellow

Strangely in all of this, u don't tell the oven when to start - it works it out itself!
First u need to set the length of cooking time, eg 2hrs.
Press the cooktime button(2nd one along), THEN use the +/- buttons to set the display to 2.00.
THEN press the readytime button (3rd one), and use the +/- buttons to set the end time.eg 1730hrs
The display should then revert to the present time.
THEN turn the oven control to the required temperature.
The oven will switch on at 1530 hrs.
If u were to press the cooktime button ONCE WHILST the oven was on - it will display the cooktime remaining.
AT 1730, the oven will switch off and the alarm will sound
To switch off the alarm, press the minuteminder button - first one - looks like a bell, THEN
REMEMBER to cancel the programme by pressing buttons 2 and 3 TOGETHER, otherwise it will do it again tomorrow!
HOPE THIS HELPS
I would suggest first.trying it when you're at home all the time the oven is on.

http://www.manualsonline.com/mdownloads/ff2c5d47-49a9-4d8c-9232-8033f1e3e147.pdf

Sounds like the oven element is broken, replacement at

http://www.elementreplacement.co.uk/belling-elecr11budget-332-p.asp

Check dimensions with the one shown

Now on sale on eBay

yes use an ohm meter to test it

seems the heating element burnt out, inspect it for small melted section, element needs replacing, about 25$ at hardware store

I think ill give it a try for you. The gas lines come in thru you cutoff valve then thru you gas valve and on to the burner. right before the burner you will see a bell shape fitting. The gas line is in the center of the fitting and there will be some opening around this fitting That fitting has dust clogging it up. This is where the gas mixes with the air Turn your oven off and blow this fitting out.

no you can't connect a double oven to a 13a socket!!

needs a proper cooker outlet wired back to the consumer unit

fan not fixable - replace. possible be that there is crap jamming the fan.check that the fan blade turns freely