Question about Canon PIXMA Office Equipment & Supplies
I switched my printer and found out that the error & power LED lights flashed then would shut down. I followed up on the internet found out that it needed to enter service mode.My problem is when i try to enter the service mode the device wont do that but will continue with the same issue of flashing and shutting down. Please help. Thanks
Hi. If you do the procedure correctly. That means that main board is defective
Posted on Feb 12, 2018
Press Stop - 0 - 0 - 1 or it maybe User Funciation then meter count - Stop - 0 - 0 -1 , it's been years since I worked on them
Posted on Feb 07, 2009
The service tech should do this. The 7435 should be less than 3 months old, and Xerox should fix it. If you bought it from Global, or another company that does not actually employ Xerox technicians, try appealing to them, but I cannot tell you for sure what the outcome will be. Buying from an authorized agency ensures that you can use your "Total Satisfaction Guarantee".
Posted on Jun 10, 2009
Hold down the two arrow keys and count to 5, hit the enter key, the machine should be in serrvice mode if nor repeat. use arrow ke and scroll to machine press enter scroll to data log press enter scroll to pm counter reset presss enter, scroll to fuser oil press enter and exicute this mod Please. DO NOT GO INTO ANY THING ELSE or you could do serious damage to your machine!! If your machine has a Copy feature expander yopt must press Clear mode, Press 1-0-7 and then hold down the stop cancel key 4sec. go into copy sp mode press 7-804-809 press exicute button again Please DO NOT GO ANY WHERE ELSE as damag can be done to your machine. Hope this helps!!
Posted on Jun 17, 2009
Hello you can try
Problem for Canon BubbleJet i560 InkJet
The waste ink is in the inside of your printer you need to get at it to clean out,
It may be all screwed down so you need to open all up or get a shop to do it for you.
It not an easy job but maybe you are handy with a screwdriver, it can be messy job.
But after this, you will have to reset the waist ink counter or it will still not work,
But but but but you can always try this to reset it first and clean it out again some time.
Canon Reset waste ink counter
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 08, 2010
Tips for a great answer:
Jul 18, 2014 | Mitsubishi WD Televison & Video
Nov 15, 2011 | Mitsubishi VS-50805 50" Rear Projection...
Apr 25, 2011 | Epson Printer
Mar 13, 2011 | Epson Office Equipment & Supplies
May 13, 2009 | Dell 1720dn Laser Printer
May 04, 2009 | Brother HL 2140 Laser Printer
Mar 13, 2008 | Epson Stylus Color 760 InkJet Printer
Jan 16, 2008 | Dell 1700n Laser Printer
6,074 people viewed this question
Usually answered in minutes!