Question about Ariston Technologies AWD121WH

1 Answer

Ariston A1636S Water is coming out of the soap dispenser draw when emptying, obviously a blockage somewhere but I can't find the filter to check it. its not at front underneath as normal and cant see anything at back. Any ideas PLEASE ???????????

Posted by Layne on

Ad

1 Answer

prem mathew

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Soap dispenser drawer.....most probably the drawer is clogged with dried up detergent. Try pulling out the drawer gently to clean it out. If not use a tooth brush to dislodge the detergent; careful dont let the brush fall in.

Posted on Nov 26, 2007

  • craig cooke May 29, 2013

    i have the same problem water comes out the soap draw like a fountain but only on a certain part of a cycle and the draw is clean any help would be appreciated

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When washer is filling water comes out of the soap dispenser


make sure there is not a build up of soap at the back of the draw or a blockage behind the drawer, it should pull out..... also redued the water pressue to the machine by turning it down at the stopcock to the machine

Dec 17, 2015 | Samsung WF337AA Front Load Washer

1 Answer

Water pouring out of the detergent drawer


Remove the dispenser draw and pour water down the soap chute as much as you can to soften any soap causing the blockage. When the water level drops, add more water. After a while use a soft flexible rubber hose and run it down the chute up and down to remove caked soap. Once this has been achieved, run the machine on "Rinse & Spin" to clean out the drum.

Mar 19, 2014 | LG WM2101H Front Load Washer

1 Answer

Water leaking


deafenatly sounds like a blockage or remove soap dispensor and check that there is no damage below it
ie a crack in the plastic allowing water to escape

Jan 16, 2010 | Miele Novotronic W1918A Front Load Washer

1 Answer

Water is pouring out of where the soap dispenser is. Can anyone help?


its pouring out because the dispenser is getting clogged in somewhere and not letting the water to the drain pump so its pouring from the soap dispenser. Remove the dispenser, pour water into the opening and make sure water can get into the machine freely. Inspect the opening for soap build up.
If water goes down slowly , open the washer door and feel around the bellow for anything blocking the water inlet port into the washer (socks can sometimes get wedged up there and cause a blockage).
If it all checks out ok, make sure the machine is properly leveled and not leaning forward.
Hope that helps!

Jul 09, 2009 | Kenmore 43142 Front Load Washer

1 Answer

Water still leaking


If the water is running down the front from underneath the drawer, then I would say that the hose is blocked from the dispenser into the drum.
You need to remove top cover, locate large black hose from dispenser into drum, feel and manipulate it to free any blockage of soap powder..
If the water still does not go into the drum, then you are going to have to remove hose to clear blockage.

Plz rate my solution.
Thanks.

Jan 08, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Water and soap remains in the soap tray


You need to check for blockage in dispenser, remove completely and thoroughly clean every part of it.
Other possibility is not enough water pressure to take all powder down, check water pressure, filters in hoses if fitted..
Check hose from dispenser to drum for restriction.
Plz rate my solution.
Thanks.

Dec 16, 2008 | LG WM-1485FHD Front Load Washer

1 Answer

Fridgidaire UltraQuiet III dishwasher model FDB750RCC0


First thing to check is to make sure the dishwasher is getting water.

Dec 03, 2017 | Dishwashers

2 Answers

Water leaks from the soap dispensing tray on Hotpoint WMA 56 model


In the sump hose there is a filter, remove the hose and clean out filter insert, water is being forced up dispenser hose because it cannot empty fast enough.

Dec 24, 2007 | Hotpoint Aquarius WMA56 Front Load Washer

Not finding what you are looking for?
Ariston Technologies AWD121WH Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Eric Taylor

Level 3 Expert

590 Answers

Harrie

Level 3 Expert

6740 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...