Question about Coffee Makers & Espresso Machines
I want to work on my jura x90
It seems to be the microswitch on powder lid that`s not locking. Check if there`s something missing from the lid, and then maybe try to put something in to close the switch.
Posted on Jun 24, 2009
If the machine reaches the steam temperature and ther is no steam coming out of the spout, the problem is usually caused by a blocked steam pipe. Milk going up into the pipe and scale may restrict the wand blocking the steam flow.
To fix it:
Warm the machine is at coffee temperature , ensure that it is not at steam temperature.
Run some water through the sream wand by turning the steam knob.
If there is no water coming out out, use a long pin or a paperclip to unclog the steam. Do not force it over the steam attachment or you may damage the machine.
While doing the job ensure that you are not hurting yourself with the hot water.
Call technical support ringing the number on user manual if that does not fix the problem or if there is no water coming out of the pipe. The machine may not be reaching steam temperature because of a faulty thermostat or the steam valve may be blocked.
To prevent this future, after frothing milk, alway clean the wand running some hot water (steam will not work) through the pipe.
Posted on Aug 17, 2010
Tips for a great answer:
Apr 11, 2012 | Jura Capresso Impressa X90 Espresso...
Jun 07, 2011 | Jura Capresso Impressa X90 Espresso...
May 27, 2011 | Jura Capresso Impressa X90 Espresso...
Oct 27, 2010 | Microwave Ovens
Jun 22, 2009 | Jura Capresso Impressa X90 Espresso...
Jan 15, 2009 | Jura Capresso Impressa X90 Espresso...
Dec 09, 2008 | Jura Capresso Impressa X90 Espresso...
37 people viewed this question
Usually answered in minutes!