Ovens Logo

Related Topics:

Question about Dacor Ovens

Open Question

I have a Dacor MCS130. the broiler element wont's work. I took out the element and checked it for continuity and it seems to be fine. What else could it be?

Posted by Brion Dodge on


5 Related Answers


  • 35 Answers

SOURCE: sears electric oven

Replace broil element

Posted on Dec 09, 2007


  • 750 Answers

SOURCE: Broiler element Whirpool Accubake electric oven not working

Welcome to Fixya
My name is Huum,

You need a new top element


You can find the diagrams,schematics, and parts for your range at this site

Please remember to leave a rating before you leave

Posted on Dec 11, 2008



  • 1 Answer

SOURCE: Top burners work, but no broiler or bake operating


Posted on Dec 28, 2008


  • 1 Answer

SOURCE: Dacor MCS130 door latch will not retract

Same problem how do I fix it?

Posted on Feb 06, 2009


  • 462 Answers

SOURCE: my broiler element wont cool down after starting

It may have a grounded element. If the flame came from the element do not touch it! The only way these elements flare up is if they coma apart. The element could be going to ground from the outer case and it would feed power from the ungrounded end. turn off power and remove element. look for wire grounded too.

Posted on Mar 27, 2009

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Lancer 92 ecr location

check elements with a multi meter for continuity
Apr 08, 2014 • Dacor Ovens

Dacro Wall oven (electric) does not heat past 345 degrees on bake or convection bake but broiler works and bottom oven works fine (for bake, convection bake and broil).

it could be the oven temp sensor rod located near the top of the inside of the oven,or possibly the bake element has a hot spot on the element and can no longer pass enough current thru this spot to correctly heat to your settings a hot spot on the element will look discolored in this area
Jul 28, 2012 • Dacor Ovens

F1 error relay circuit failure

Hi This is the Alarm system watchdog circuit :

The system has detected a failure in the internal watchdog element , relay circuits and will atcivate a cancel feature. F1 will be displayed in the time digets and will beep until the cancel button or another funtion is selected. An F1 failure could be detected in cook or time of day mode. With an F1 failure the ERC is picking up a comand to supply heat without receiving an input from the membrain. The watchdog circuit is designed to prevent this.
If the beep continues after pressing cancel check the main control ERC board.

My heating elements for both bak and broil suddenly do not work.

Verify 220 volts of power to the oven. If 220 volts is present and all wires are in good shape, replace the electronic control.

Oven says u20over

Seems to me you having problem with touch panel. It needs to be replace.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede


Oven thermostat

Hi Andew 799.
It sounds to me like your oven element(s). is faulty
If it is a fan assisted oven then you should check that first. You will need a multimeter to test it.
If it is a conventional oven, then it will have 2 side elements, and it is possible one has gone, thereby only giving you half heat.
The other possibility is a faulty thermostat probably cutting off prematurely.
You must check the elements first.
Hopr this helps.
Good luck.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Jaime Hernandez

Level 3 Expert

2351 Answers

Paul Bade

Level 3 Expert

1744 Answers


Level 3 Expert

3511 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides