I have lost my instructions to change the codes on my Brinks

I CAN'T REMEMBER MY 6 DIGIT CODE AND CAN'T FIND MY MANUAL, I WANT TO RESET IT, CAN YOU PROVIDE ME WIT INSTRUCTION?

How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt BE365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Aug 24, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

How do i change the code on this lock

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Jan 31, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Need to change code.

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on this page, showing how to change codes.

Good luck!

Jan 29, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

How to set code

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on this page, showing how to change codes.

Good luck!

Jan 24, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

2 Answers

Do you know how to reprogram digital code?? kwikset 907 lock

1) Remove back cover (instructions usually are stuck on the inside of the back plate cover .. if not continue next ...
2) Make sure all batteries are fully secured.
3) Press the square Reprogram button
4) Press the keypads of your code. If you do not hear any sound when pressing the buttons, then it means your batteries are not fully secured.
5) After entering your code, press the middle keypad (lock) once.
6) To double check things are working right, then press the keypad buttons again and then when you see the deadbolt is unlocked, then press the middle keypad (lock) again to ensure the deadbolt comes out to lock.

Recommend periodic lubrication of the deadbolt lock for less strain on the batteries ,,, and lubricate the key lock occasionally as well.

Jan 06, 2011 | Kwikset 907 907-15 Satin Nickel Powerbolt...

1 Answer

I lost my instructions to change the keypad password, can you please instruct me on how to change this password?

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Jan 05, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

I would like to program the schlage deadbolt keypad using my personal code.

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on that page.

Good luck!

Dec 18, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Change code

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video for changing codes on this page!

Good luck!

Nov 29, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Manual for changeing code

How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Nov 12, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Schlage BE365vply505 Keypad Deadbolt code change

how do i change code

Jul 05, 2010 | Schlage BE365-PLY BE365PLY626 Satin...

I have lost my instructions to change the codes on my Brinks digital deadbolt. I got the 6 digit code. What next

5 Related Answers

Mike Schmidt

Anonymous

Anonymous

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I CAN'T REMEMBER MY 6 DIGIT CODE AND CAN'T FIND MY MANUAL, I WANT TO RESET IT, CAN YOU PROVIDE ME WIT INSTRUCTION?

How do i change the code on this lock

Need to change code.

How to set code

Do you know how to reprogram digital code?? kwikset 907 lock

I lost my instructions to change the keypad password, can you please instruct me on how to change this password?

I would like to program the schlage deadbolt keypad using my personal code.

Change code

Manual for changeing code

Schlage BE365vply505 Keypad Deadbolt code change

Not finding what you are looking for?

Locks & Locksmithing

I CAN'T REMEMBER MY 6 DIGIT CODE AND CAN'T FIND MY MANUAL, I WANT TO RESET IT, CAN YOU PROVIDE ME WIT INSTRUCTION?

Open Questions:

Micromark mm4900. How can I set it up?

how do i change the code on a gettysburg 24 gun eletronic safe?

I have not forgotten my combination, however, I am unable to open it. What are my options?

I have locked my keys in the safe and have forgotten my code. Can I reset a new code so that I can be able to open up my safe again? Have tried to use the manufacturers code but no luck. Garrison electronic safe EA20 Serial # EX2006274214

Related Topics:

Ask a Question

Top Locks & Locksmithing Experts

ray gallant

Chris Walker

Tom Chichester

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Manuals & User Guides

Yale-Y-Series-Padlocks-Catalog...

Istruzioni cassaforte.pdf....

WR3234330.pdf. user-manual-Powerbolt...

I have lost my instructions to change the codes on my Brinks digital deadbolt. I got the 6 digit code. What next

5 Related Answers

Mike Schmidt

Anonymous

Anonymous

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I CAN'T REMEMBER MY 6 DIGIT CODE AND CAN'T FIND MY MANUAL, I WANT TO RESET IT, CAN YOU PROVIDE ME WIT INSTRUCTION?

How do i change the code on this lock

Need to change code.

How to set code

Do you know how to reprogram digital code?? kwikset 907 lock

I lost my instructions to change the keypad password, can you please instruct me on how to change this password?

I would like to program the schlage deadbolt keypad using my personal code.

Change code

Manual for changeing code

Schlage BE365vply505 Keypad Deadbolt code change

Not finding what you are looking for?

Locks & Locksmithing

I CAN'T REMEMBER MY 6 DIGIT CODE AND CAN'T FIND MY MANUAL, I WANT TO RESET IT, CAN YOU PROVIDE ME WIT INSTRUCTION?

Open Questions:

Micromark mm4900. How can I set it up?

how do i change the code on a gettysburg 24 gun eletronic safe?

I have not forgotten my combination, however, I am unable to open it. What are my options?

I have locked my keys in the safe and have forgotten my code. Can I reset a new code so that I can be able to open up my safe again? Have tried to use the manufacturers code but no luck. Garrison electronic safe EA20 Serial # EX2006274214

Related Topics:

Ask a Question

Popular Questions

I WHANT TO RESET MY MASTER LOCK , WHAT STEPS I HAVE TO FOLLOW?

I have a Defiant Electronic deadbolt from home Depot. model G1X2D01. ive lost the manual and i need to delete some old codes from it.

Forgot pin code to unlock my hardline digital safe

Kwikset Smart Key Deadbolt Won't Unlock

Need to reset the electronic code to open the safe.

Top Locks & Locksmithing Experts

ray gallant

Chris Walker

Tom Chichester

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Manuals & User Guides

Yale-Y-Series-Padlocks-Catalog...

Istruzioni cassaforte.pdf....

WR3234330.pdf. user-manual-Powerbolt...