Temperature light stays on all the time on Lofra mxd96ggei/c

Contract Lofra:

http://www.lofra.it/

Via Montegrotto, 125 - 35038 TORREGLIA (PD) - ITALY

Tel. +39 049 9904811 r.a.
Fax. +39 049 9904800
Partita IVA e Codice Fiscale 04433800283 -
[email protected]

Lofra seem to put out just one manual, covering service and use for all of their cookers. Includes Italian and English translation.
Content doesn't appear to have changed much over the years, but I did find three versions- the latest on their website, and older versions in the Wayback Machine at archive.org.

Rev 1.42, from 2016 (current)

http://www.lofra.it/wp-content/uploads/2017/04/manualeITA_ING_a5_rev1.42.pdf

Rev 1.39, from 2015

https://web.archive.org/web/*/http://www.lofra.it:80/wp-content/uploads/2015/04/03201494_manualeITA_ING_a5_rev1.39.pdf


Rev 1.29, from 2011 (filename in the .zip file says it's rev 1.30)

https://web.archive.org/web/20111208161934/http://www.lofra.it:80/sites/default/files/manuali/manualeIT.zip

I had the same problem with my Lofra, I removed the cover on the bottom of the inside of the oven and then unscrewed the metal bit under that. Then I tested it again so I could see why it wasn't lighting up. Turns out the heat sensor was in between two flames and wasn't detecting that the gas was on. I wiggled things around a bit until it stared working, then put the cover back on. Now it works wonderfully. Now I just have to fix the timer.. It doesn't ring when it reaches the end. Hope this solution works for you guys.

Hi Gemma, this is Carlos from Lofra of Brazil. I would recommend you to contact our headquarters in Italy to help you locate the needed part for your range.
Please write to [email protected] or call +39 049 9904811.

Kind regards,

Carlos Fleischfresser
Lofra Sud America

Hi Kapshaug, this is Carlos from Lofra of Brazil. I would recommend you to contact our headquarters in Italy to help you locate the needed part for your range.
Please write to [email protected] or call +39 049 9904811.

Kind regards,

Carlos Fleischfresser
Lofra Sud America

Have the hinges and springs definitely gone? I only ask because Lofra oven doors have a reasonably awkward fitting method. If you don't get the anti rotation hooks sorted out correctly. There is a manual online that may help. http://www.lofra.it/manuali/manualeITA_ING.pdf you would need to check page 44 of this pdf file to just see what I mean. Other than that I have not seen these as spares anywhere, So I apologise if I have wasted your time.

There's no doubt you need a replacement. Take the
measurement of the glass, ( length, width, and thickness), then go to the glass dealer store and look
for a high temperature glass for your cooker. Another
option is to go a lofra mxg96ggi/c dealer amd order
a replacement glass.

The orange light is designed to go off when temperature required is achieved in the oven. If the light remains on it suggests that the oven is not heating, It could be a thermostat problem but it's more likely to be the element.