Washing machine tripping RCD

How can I figure out why my washing machine is tripping the ...

diy.stackexchange.com/.../how-can-i-figure-out-why-my-washing-machi...

Aug 17, 2012 - 110.24872300) washing machine which up to this point has been ...Note what is happening when it trips (is it starting to spin, starting to drain, filling, etc.).... If the outlet trips when the washing machine isn't running and isn't ...

Washing machine tripping RCD « Singletrack Forum

singletrackworld.com/forum/topic/washing-machine-tripping-rcd

Switching on the plug socket that the washing machine's plugged into caused no problems, but switching the machine itself on trips the RCD. ... then its possibly the water fill solenoid as most cycles start with a water fill. ... I've always guessed it is theelectricity/water combo somewhere in the machine so err on the side of ...

Sounds like you keep the washing machine in an environment which is either damp or not well ventilated.if condensation or moisture finds it's way onto the main control panel of said machine it will cause short circuits which will then trigger the house protection circuits.quick solution is to gain access to the control panel by removing the top after disconnecting power supply.then using a hair dryer over the circuit board panel for about five minutes, reconnect power and keep hands away from any internals and try to repeat the problem.if it still trips it could be a faulty relay or that the main pcb has failed.have you recently experienced local thunderstorms as this is another possible reason for damage to pcbs.

I would say the heater element has blown this would cause main trip switch to trip

check heater

may be a blocked pressure pipe

Question?#$@???
Exxcel 1400 express with the number E-Nr. WFX2867GB/10 FD 8410604749,
The last time I used the machine I interrupted it while it was washing and thereafter its stopped working. When turned on it will collect water and detergent but will not turn or wash.
What do I do????

sound like the motor brushes are worn out, just remove motor and fit new brushes. nice easy repair

Hello,
It would seem to me that the heating element needs replacing from the information you have supplied especially as it performs most of the other functions like filling and spin and drain.
Good luck

This video will show you how to replace the Bosch washing machine heating element and thermostat with step by step guide on the process

just go a bosch washing machine exxcel 14 express cant get it to work can anyone help i dont have the user book my email is [email protected]