Polaroid pop camera will not turn on.camera was fully charged

SOURCE: Camera turns on for a few seconds, then off.

A light rap with a knuckle when powering up fixed the problem, at least temporarily. Lens extended, camera works fine. Not exactly a technical fix, but it worked for me.

SOURCE: Battery Fully Charged Camera Won't turn on

Hi

There are several things that could cause this.

1- Check the battery door indicator switch under the battery door and beside the memory card slot. Is the little black switch damaged or missing? Try pressing down gently using a pen it with the door open and then press the power button. Does it turn on?

2- The fuse has blown and needs to be replaced. Offhand I don't recall where it is on the SD600 PCB or how hard it is to solder on a new one (depends on if its tricky to get at or not). Good thing is fuses are really cheap.

3- Other power problem with the PCB due to corrosion or impact damage. The PCB or 'motherboard' of the camera will need to be replaced.

A couple solutions would be to either buy a defective camera online and make one good camera from the two if you can do that sort of thing yourself, or secondly have it repaired by somebody.

Don't bother trying to send the camera to Canon if it is out or warranty (though you can call them and verify what I'm about to say) because they will want $150+ to do the repair for you. Parts are not cheap to buy from them.

I know of one very affordable digital camera repair business... because I own it. The name is Darntoothysam, feel free to check us out, we are on that big auction website also (I don't plug their name for free), our seller ID is 'darntoothysam'. If you Google "darntoothysam" you will find us.

If we can help with your repair then please let us know.

Hope this helps,

Thomas

SOURCE: Camera will not power on

If you have a warranty that covers dropping, send it in. If not try contacting Canon, go to this link and plug in your information. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=224&modelid=12913

SOURCE: canon sd1000 camera won't turn on. battery is fully charged.

Hi,
Make sure or Check out following thing :-

• Direction of your battery might be wrong, Check out and put it again.
• Clean your battery terminal with soft cloth. (Might be it will filled with dirt or dust )
• Check whether Memory Card/Battery Cover is properly closed.
• Load new or fully charged battery.
• Turn ON the camera, again firmly.