Question about Precor Exercise & Fitness
Starter solenoid. I don't have the page here but in chiltons a page shows the ignition to fuse to relay to starter and if you look closely it's quite basic. I had same problem with constant fuse blow #8. The solenoid over time wears and sometimes sticks. When it sticks, your system can overload thus burn fuse. I bet you never stalled out while driving, but only when you shut off and start somewhere it's a no go. That's because you're system is already engaged. I had to change starter as solenoid part of it all. I see others suffer this same problem so please share this around. Solenoid can stick for a millisecond.
Posted on Apr 24, 2009
I am not familiar with the specific model, but my guess is you can setup another separate logical vlume by using a RAID1 for the new disks. You will not be able to add the disks to the existing volume.
If there is no data, and the array supports it you can delete the existing volume and setup a RAID 5 instead, which will use all 4 disks, as long as they have the same capacity.
Posted on Apr 27, 2009
Hi there if u have already replaced the brush motor and the brushes stil aren't rotating, you wil need to also replace the circuit board that is located in the upper part of the machine after u take the 5 screws out the back, hope this helps, I repair bissells for a living so any problems email me, [email protected]
Posted on Feb 08, 2011
Tips for a great answer:
Dec 22, 2014 | Precor C966i Commercial Treadmill Used
Sep 21, 2014 | Bissell 9500 ProHeat 2X CleanShot Upright...
Jan 10, 2012 | Precor 9.21 Treadmill
Nov 21, 2010 | Bissell 9500 ProHeat 2X CleanShot Upright...
Aug 18, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...
Mar 20, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...
Jan 17, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...
May 11, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: