Why won't my iPad pair with my vivofit 3 - iPad Apple Tablets & eReaders

I can pair mine with my iPhone using the Garmin connect app from the app store, so I would guess that the iPad would work, but I don't have an iPad.

hi marilyn.
The first time you use your Apple Pencil, take off its cap and plug it into the Lightning connector on your iPad Pro. When you see the Pair button, tap it. After you pair yourApple Pencil, it will stay paired until you restart your iPad, turn on airplane mode, or pair with another iPad Pro.19 Sep 2017

Use Apple Pencil with iPad Pro - Apple Support.

How do you use the Apple Pen with the iPad pro Google Search

on your iPad go to setting-> then down to bluetooth. on your headed set Press and hold the multi-function button for 10 seconds until the indicator light turns blue. It is now in pairing mode. it should show up on your iPad, click on your headset and it should pair.

Make sure the keyboard does not have a pairing relationship with another device in the room.

If there are any devices listed on the iPad, in Bluetooth settings, tap 'I' and forget Device.

Place the keyboard in pairing mode with a 5 second depress on power from the 'off' or no power state.

Type the keys on the keyboard that the iPad wants for the pair.

try to turn on BT on iPad while Logitech is blinking (which means it in pairing mode and can be discovered). If that doesn't help I'd suggest to remove batteries from Logitech for 3-5 minutes then put them back.

I assume it's not a surface PRO 2 but just a regular Surface 2. The surface 2 runs Windows RT which only runs specials apps designed for it. It can't run software that is made for regular Windows computers. Unless garmin creates specific software for Windows RT I'm afraid that it might never work.

You can attempt the software found here: http://download.garmin.com/omt/express/B/GarminExpressInstaller.exe but I doubt it works.

What you're trying to do it akin to runnign iPad apps on a Mac, it doesn't work before the architecture is different.

Check that the keyboard's battery is working and it's on. Turn on Bluetooth on the iPad (Settings > Bluetooth). Press the keyboard Connect button. Choose the ZAGG Keyboard on the iPad, and type the code on the keyboard.
This doc describes the process: http://cfprod.zagg.com/downloads/ZAGGfolio%20instructions/ZAGGfolio%20instructions.pdf
Good luck! :)

You have to have the 2 iPads basically side by side. Then you go to the bluetooth section on both. Then on each one it will come up with the name of the other iPad. The beside the name on each one it will say "not paired". Click the name on both iPads. Then it will pop up asking if you want to pair with the other iPad. Hope that helped.

Call Zynga's Phone#: 800-762-2530
How to reach a live person: Dial 3 when recording begins