Question about Life Fitness Exercise & Fitness
SOURCE: Replace Switch error message
It was the emergency tag that you attached to yourself when you run (in case you fall over - the belt then stops etc). i had not connected it properly
Posted on Jan 27, 2009
SOURCE: 9100 life fitness treadmill
Sounds like you need a new lower board replacement. You can get that for that treadmill by call lifefitness or sportsmith.com Please rate me good
I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511
Posted on May 01, 2009
Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It
Posted on Mar 24, 2010
Tips for a great answer:
Feb 13, 2013 | Life Fitness Exercise & Fitness
Dec 11, 2012 | Life Fitness F3 Advanced Console Folding...
Sep 20, 2012 | Life Fitness 91Ti Treadmill
Sep 27, 2017 | Life Fitness T70 Treadmill
May 17, 2010 | Life Fitness 9500HR Treadmill
Jul 14, 2009 | Life Fitness 9100 Next Generation...
Apr 22, 2009 | Life Fitness 9100 Next Generation...
Mar 29, 2009 | Life Fitness LifeFitness 97Te Treadmill
Oct 31, 2019 | Life Fitness 95ti Treadmill
802 people viewed this question
Usually answered in minutes!