Uniden Bearcat BCT15X scanner need to set it to factory default

Uniden BC340CRS Owner Manual

Resetting the Scanner (Clearing all Memories)
To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased.

Check your scanner for a model number. I have found an online manual for the Uniden BCT15X from Uniden: http://info.uniden.com/twiki/bin/view/UnidenMan4/BCT15X . This model has the TrunkTracker III logo to the upper left of the LCD screen. The Uniden logo is to the lower left of the LCD screen. The model number is given above the upper right of the LCD screen. Then the Bearcat logo is below the right side of the LCD screen. Some other Uniden scanner manuals are available here: http://info.uniden.com/twiki/bin/view/UnidenMan4/UnidenScannersUsersGuides . Scroll down to the Individual Scanners section to find the links.

I hope these links help.

Cindy Wells

SOME, of the Bearcat radios you could hold down the "2" and "9" button while turning it on - worked on the old units; I don't know about the newer ones.

you may have to do a manual scan..or find out what frequency the different companies and police ,fire and airplanes use,,then you may need an outdoor scanner antenna,,the small antenna that comes with the scanner only picks up very strong signals,,,to program the scanner you may have to search online for programming info,,,,good luck


trevor 320

To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased.

Hold these 3 buttons all at once while turning the unit on (will take 2 hands)

Find your Model Number below for the Owner's Manual

BC246T:
https://www.gijoesradioelectronics.com/images/policescanner-unidenbearcatbc246t-ownersmanual.pdf

BC350C:
http://www.uniden.ca/pdf/BC350Com.pdf

BC72XLT:
https://www.gijoesradioelectronics.com/images/policescanners-unidenbc72xlt-ownersmanual.pdf

BC898T:
https://www.gijoesradioelectronics.com/images/policescannerradio-unidenbc898t-ownersmanual.pdf

BCD966T:
https://www.gijoesradioelectronics.com/images/Uniden-Scanner-Bcd966t-owners-manual.pdf

BCT8:
https://www.gijoesradioelectronics.com/images/policescanners-unidenbct8-ownersmanual.pdf

BCT15:
https://www.gijoesradioelectronics.com/images/Uniden-Scanner-Bct15-Owners-Manual.pdf

BCT15X:
http://info.uniden.com/twiki/bin/view/UnidenMan4/BCT15X

BC92XLT:
https://www.gijoesradioelectronics.com/images/policescanner-unidenbc92xlt-ownersmanual.pdf

BC95XLT:
http://www.ccrane.com/instruction-manuals/uniden-bc95xlt-handheld-scanner.pdf

BR330T:
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/BR330Tom.pdf

SC230:
https://www.gijoesradioelectronics.com/images/policescanners-unidenbearcat-sc230-ownersmanual.pdf

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

The BC350 is a pre-programmed scanner. You cannot program it in the usual manner (direct keyboard entry of each frequency), but you can transfer displayed frequencies in the SCAN or SEARCH mode to a PRIVATE bank. Detailed instructions for operating your scanner are in the factory manual which you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

To RESET your scanner:
- Power it OFF
- Press and hold the 2, 9, and MANUAL keys and power the scanner ON

This procedure will erase all programmed frequencies and return the scanner to its original factory settings.

Bill B.
Listening in since the 60's

hello there: here is a link for you that will help out ok
best regards mike

How to Program a Uniden Bearcat Scanner BC 140 | eHow.com How to Program a Uniden Bearcat Scanner BC 140. Programming a Uniden Bearcat ... How to Program a Bearcat 5 Scanner. How to Program a BC 560XLT Scanner ...
www.ehow.com/how_5009391_program-uniden-bearcat-scanner-bc.html - 57k -