Question about Samsung Cameras

Open Question

Samsung Digital d75 factory setting when lcd donot show display

Posted by Nadeem Akhtar on

Ad

4 Related Answers

Anonymous

  • 1 Answer

SOURCE: Samsung D75 digital camera. Having

Problem resolved. My own stupid operating fault. It appears that, in movie mode, you don't just press the shutter button to start a shot, you have to hold it down for a moment. Not made clear in user manual, but I should have twigged earlier.
Thanks for your contact/help.

Posted on Aug 30, 2008

Ad
t00nz

CameraR

  • 4738 Answers

SOURCE: my canon sd10 digital camera lcd balnk/black bu

Had the same problem with my SD10. The switch in the AV port sometimes gets dirty or corroded, and tricks the camera into thinking that an AV plug is inserted. This will turn off the screen.

To fix it, repeatedly insert and remove an AV cable into the port several times. This may help break off any corrosion or dirt that may be holding this switch open.

Posted on Nov 08, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Factory Settings LE32A557

Ready was set to yes in the service menu. It should have been no.

Posted on Dec 13, 2009

Anonymous

  • 61 Answers

SOURCE: samsung sc-d353 lcd panel doesnt show any display

check with mains power if that works then battery stuffed

Posted on May 19, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lcd display does not work


On the back of your camera, to the left of the display, are three buttons. The top one is the display button. (a square between two standing lines) pressing that button will switch between image & full information, Image & basic information and LCD off. Try pushing that button several times, while the camera is on and see what happens. There is no such thing as reset to factory settings for users. Look on page 29 of the manual. It is still online with Samsung (Retrovo)

Nov 25, 2013 | Samsung Digimax 360 Digital Camera

1 Answer

I purchased a samsung ES70 compact digital camera last year and lately a black line has appeared across the bottom of the screen, could I get rid of it or would i have to purchase a new camera?


Hi,

If the line is only on the display and not also on the photos when you download them to the pc, then you only need to have the LCD display replaced. The screen should cost like ~$20 as you can see here: http://www.aliexpress.com/product-fm/307874294-Replacement-Camera-LCD-Screen-display-for-Samsung-Digimax-S630-S730-S750-D75-NEW-Free-Shipping-wholesalers.html

Regards,
Katharsys

Mar 30, 2011 | Samsung Digimax S630 Digital Camera

1 Answer

Operation manual D75


Most of the manuals for Samsung cameras are available online. You could locate them either by going directly to the manufacturer's website and then on to the Support section or by performing a search on Google. The Google search I performed was for "Samsung D75 operation manual" and the first result already provided me the manual: SAMSUNG D75 Operations Manual. Simply click on "Get Manual".

Mar 30, 2011 | Samsung Cameras

1 Answer

When i run cpu but monitor display donot showing


I assume you have already try it with other PC and get the same problem.
Next step will be taking it apart.
Most common failure in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas of what goes wrong: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further, it will also help out other people with the same problem.

http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Apr 05, 2010 | Samsung 933SN Monitor

1 Answer

Factory reset Menu


IF A SAMSUNG TV Put tv into STANDBY

WARNING DO NOT CHANGE ANY OTHER SETTINGS TV WILL NOT WORK

Press INFO / MENU / MUTE / STANDBY on remote tv will come on with service menu displayed and FACTORY RESET (12) is on it
ONLY USE DOWN NAVAGATION KEY until you highlight factory reset
NOW PRESS RIGHT NAVIGATION this will reset all settings
PRESS POWER ON THE TV TO EXIT then turn on tv and retune

Nov 07, 2009 | Samsung LE32R72BX 32 in. HD-Ready LCD TV

1 Answer

Samsung D75 digital camera. Having taken a clip in movie mode, I have a 'standby' message on the LCD screen. Can't seem to get rid of it to take another clip. When I press shutter button I just get a bleep...


Problem resolved. My own stupid operating fault. It appears that, in movie mode, you don't just press the shutter button to start a shot, you have to hold it down for a moment. Not made clear in user manual, but I should have twigged earlier.
Thanks for your contact/help.

Aug 29, 2008 | Samsung Cameras

1 Answer

Samsung d75. when attempting to take photo with the flash, the flash indicator on the back display simply flashes constantly and the flash doesn't go off or a picture taken.


Problem with CP ... U need to take it to a service centre ... Is a common problem and a good technician will fix it for you in no time flat ...

Jul 20, 2008 | Cameras

Not finding what you are looking for?
Cameras Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

Cindy Wells

Level 3 Expert

6198 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

k24674

Level 3 Expert

8091 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...