What is the remote control code using a Dish Network remote with a Olevia 332H 32" LCD HD TV?
Thanks
Dish Netork does not have the code for Olevia
but you can scan for the code using the infformation
here
Remote Code Power Scan
If your brand is not listed, use the following procedure to scan through all codes.
If you start the and do not press a button within 20 seconds, the remote will end the scan automatically.
1. Turn ON the unit you want to program the remote to control.
2. Press the Mode button on the remote until the appropriate mode light is flashes
3. Press the Address button. The mode light will start flashing slowly.
4. Press the Power button. The mode light will stop flashing and stay lit.
5. Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward.
6. When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.
7. Press the Address button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
8. Turn the device back ON by pressing the Power button.
9. Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
10. If the other buttons work, follow the current settings procedure below to determine the current remote settings.
11. If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
12. The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.
A small correction to Tech 8's solution. see # 6 and 7. and thank you Tech 8 for your input.
Dish Netork does not have the code for Olevia
but you can scan for the code using the infformation
here
Remote Code Power Scan
If your brand is not listed, use the following procedure to scan through all codes.
If you start the and do not press a button within 20 seconds, the remote will end the scan automatically.
1. Turn ON the unit you want to program the remote to control.
2. Press the Mode button on the remote until the appropriate mode light is flashes
3. Press the Address button. The mode light will start flashing slowly.
4. Press the Power button. The mode light will stop flashing and stay lit.
5. Press the Up or Down arrow button to set the remote to the next code. The Down arrow button scans backward and the Up arrow button scans forward. I found the code on press #6 going forward and press # 26 going backwards
6. When the correct code is reached, the device (whether a TV, VCR, or other) will turn off.
7. Press the (pound) button to store the code in the remote control memory. If the code is valid for your remote, the mode light will blink 3 times.
8. Turn the device back ON by pressing the Power button.
9. Try some other functions to make sure you have the correct code. Occasionally the Power button may work when others do not.
10. If the other buttons work, follow the current settings procedure below to determine the current remote settings.
11. If the other buttons do not work, repeat the previous steps. The scan will resume from the last code stored.
12. The mode light will flash rapidly when the scan has returned to the starting point and all codes have been tested for that mode. The remote control may not control some device models.
We would be happy to help you with getting your DISH Network remote to control your Olevia TV. We're going to start by pressing and holding the TV button located on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Olevia tv; here some of the codes we currently have: 910, 506, 578, 580 and 564. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Olevia TV until you find one that is compatible with your equipment.
We hope this helps and thank you for being a valued DISH Network customer!
Phillip Chang
DISH Network Customer Service Representative
codes for it ........direct tv ...please help
1,868 views
Usually answered in minutes!
Need TV remote code for Olevia 32" and 26" LCD HD TV's for Verizon Fios TV service
KAIA TV
have a Olevia 542 can't find codes for Dish Network on either remote, called both no help, by scaning with Olevia remote I found code 3030 works sat. but not volume on tv. If you have Dish Network, I would not buy this tv.
I have a Olevia 542 can't find codes for Dish Network on either remote, called both no help, by scaning with Olevia remote I found code 3030 works sat. but not volume on tv. If you have Dish Network, I would not buy this tv.
37 inch olevia... need codes for radio shack remote or dish networtk
Olevia 26T does not have codes for FIOS remote and manual code fine does not work.
Hook olevia tv to dish
cant use remote
×