Question about Jura Capresso Coffee Makers & Espresso Machines
I had a similar problem. I took off the side and rear cover, followed the hose that comes from the steam wand to the rear of hte unit. It enters a solenoid made by ACL Italy. I dismantled the solenoid unit by disconnecting the two hose ends, removing the relay, and unscrewing the plunger unit (vertical pipe). The plunger unit internals should move freely up and down like a piston in a cylinder , powered by a small spring. In my unit, this plunger was calcified and seized. I soaked it in boiling water and pressed on it gently several times and it unstuck. I put it all back together again and presto! Good luck
Posted on Mar 30, 2010
SOURCE: Capresso jura S9 IMPRESA
hi did you ever fix this problem, i too have this - i know it is because of coffee sludge built up in the system but i want to know how to open the machine and give it a good clean - cant seem to work out how to do it though.
Posted on May 05, 2010
SOURCE: My Jura Capresso Impressa S9
This error is due to the coffee sludge built up in the system and needs you open the machine and clean it.
Note - Capresso recommends that you unplug the unit, wait a minute, and then plug in and turn on. Try twice if the first time doesn't work. If you still have a problem, call Capresso, and if your machine is under warranty they will repair it for you free of charge and even pay shipping both ways.
For cleaning instructions, let me provide you with a generic link that would help you :
Posted on Aug 19, 2010
Tips for a great answer:
Jan 28, 2017 | Jura Capresso Coffee Makers & Espresso...
Jan 14, 2016 | Coffee Makers & Espresso Machines
May 04, 2012 | Jura Capresso Impressa S9 Coffee...
Jan 29, 2012 | Jura Capresso Impressa S9 Coffee...
Jan 08, 2012 | Jura Capresso Impressa S9 Coffee...
Sep 23, 2011 | Jura Capresso Impressa S9 Coffee...
Apr 30, 2010 | Jura Capresso Impressa F9 Espresso Machine
46 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 1 Expert
Level 3 Expert