Question about Generac Electrical Supplies

Open Question

We have a generac model# 941-1 need to change the inverter assy for part# 0D48850SRV which we were told was the replacement but it has different plugs than the original part, how can we install then?

Posted by Ira Medliosa M on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have ix800 overload light is on wont produce power.what could be the problem?


Two things come to mind, (1) the unit is carrying too much of a load. Unplug everything and try again, and (2) the inverter assemble is defective and needs to be replaced (most likely cause if nothing is plugged in). (Still under warranty?)

Jul 08, 2016 | Generac Power Systems Generac iX800 Watt...

2 Answers

I have a 24' travelaire 1989 rv. is there a switch to go from electrical hook up to battery operated lights in the camper


there is a power inverter,somewhere near the front of the trailer, RV Basics 12 Volt DC Systems

http://www.winnebagoind.com/resources/manuals/pdfs/Winnebago_Catalog.pdf

Atwood Mobile Products: 574-264-2131
Carefree of Colorado: 800-621-2617
Carriage Carpets (Shaw Flooring): 877-706-3054
CCI Controls: 800-521-5228
Coleman: 316-832-4357
Denso: call Fleetwood 800-322-8216
Dometic: 800-544-4881
Fantastic Vent: 800-521-0298
Generac: 888-GENERAC
Intellitec: 800-251-2408
Kidde Safety Products: 800-880-6788
Kwikee Products: 800-736-9961
Magic Chef 800-688-1120
Magnadyne: 800-638-3600
Norcold 800-543-1219
Onan: 800-888-6626
Power Gear: 800-334-471
Riverpark: 800-442-7717
Suburban: 423-775-2131
Suburban Dynatrail Furnace Manuals
Thetford: 800-521-3032
Velvac: 800-783-8871
Winegard: 800-288-8094
Xantrex (invertor/chargers and control panels )



http://www.rverscorner.com/wiring/index.html

Manuals 1989 older RVing The Midwest Connection

May 14, 2015 | Camper Vehicle Parts & Accessories

1 Answer

I have a generac ix2000 and has an overload light on with no AC power out. what do i need to check?


When you have a generator with a inverter in it you have to be careful of overloads an static electricity. More than likely one or more otf the MOSFETs has blown. An inverter is really a switching supply. Not very hard to replace parts but if you have spme skill with electronics take it apart an give it a go. If transistors have not blown you may find a blown fuse inside on circuit board. You will never find a schematic for any of these units. They are protected because the dealers pay to much for selling rights you cant hardly get them. But i would take it apart an see what you have. Or find a good electronics guy an ask him to check it

Jan 22, 2015 | Generac Inverter Ix2000 Gas Portable...

1 Answer

Generac gen 10000xp will not start not getting fuel


Is there fuel in the carburetor Bowl?
did you try running a separate gas line from a different gas tank to the carburetor?

Apr 01, 2014 | Generac XP10000E XP 10000 E 5932 Portable...

1 Answer

Generac ix 2000 does not start. checked spark plug and it is good. oil good.


what a **** generator, worked for 100 hours and now wont start anymore.
did all the checks and replacing of spark plug and oil etc, simply wont start, ****, ****, ****..... service is horrible too. they just give you the runaround.

Apr 02, 2012 | Generac Power Systems Generac 5793 Ix 2000...

1 Answer

I have a Samsung model HLP4663wx/xaa and I just recently changed the color wheel assy. I am on my 3rd bulb, I also changed the ballast recently. Now my problem after the color wheel install is the picture...


if you replaced the ballast your self you may have overlooked a plug to be plugged in, i would take it apart again and check that all plugs are as they should be, for the problem started right after you replaced the lamp power supply. if a repair shop serviced the unit you may be part of a scam and if so get a 2nd opinion from a different repair shop

Jan 10, 2012 | Samsung Televison & Video

1 Answer

Gererator turns off when i turn the idle control switch on generac 7500


the governor or or the idle coil assy needs to be replaced. Possible that a adjustment could be made.

Feb 07, 2010 | Generac 5622 GP Series GP5000 6,250 Watt...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Generac Electrical Supplies Experts

Sheldon Dedek

Level 3 Expert

912 Answers

JOHN LAPIER

Level 3 Expert

2601 Answers

Bill Johnson

Level 2 Expert

306 Answers

Are you a Generac Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...