Question about Lucent Lands Phones

Open Question

Lucent trimline - This just started recently. When I try to dial a number al hear is a busy signal.

Posted by Cynthia Peck on

Ad

5 Related Answers

IB4G2008

Patrick Michaels

  • 3587 Answers

SOURCE: Busy signal when trying to send fax

of course..is that phone line, by chance a high speed internet connection?

Posted on May 28, 2008

Ad

Anonymous

  • 24 Answers

SOURCE: I cannot dial out.

The dial may be defective and when you dial it is putting out erronous tones. When the Phone Company heres digits that do not correspond to a legal phone number it will give you a error tone or busy tone. It could be the phone got put on pulse and the line won't recognize the pulses

Posted on Dec 29, 2008

Ad
rmeyer

Richard Meyer

  • 80 Answers

SOURCE: Have dial tone, but can't fax

It sounds like the modem is bad a possible electric serge

Posted on Jan 09, 2009

Anonymous

  • 1 Answer

SOURCE: no dial tone/ others trying to call get busy signal

Turns out that it was a wiring issue and not the phine.

Posted on Jun 20, 2009

Anonymous

  • 1 Answer

SOURCE: I have a Uniden DECT 6.0 CORDLESS phone and the

The light in the upper left indicates you new messages. The light will flash until you clear all messages.

Posted on Jun 21, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I dial a fax number I get a busy signal even though I know that the number is not busy because I have dialed it on my outside line and it works. This has happened repeatedly. I have unplugged...


Since you mentioned that you have an outside line, do you have to use a code to dial out normally? Try plugging in a phone to the line for your fax machine, and attempt to dial the number for the other fax machine using the phone. You should reach the fax and hear a high pitched sequence of tones. This is the other fax machine trying to establish a connection. If you still get a busy signal, try calling the owner and letting them know that their fax machine is not accepting incoming calls.

Feb 22, 2010 | Brother IntelliFAX 770 Plain Paper Thermal...

2 Answers

Every time I try to fax I get a busy signal. I tried to fax several places and I get the same thing cannot be completed as dial.


dial those numbers from a regular phone and listen for fax tones. If you hear a busy signal, then they are busy.

Jan 14, 2010 | Brother FAX-575 Plain Paper Thermal

1 Answer

When trying to fax, iam getting a fast busy signal, this problem just strated


This could be related to the fax machine, but more than likely it's a phone line issue. Try sending a fax manually by using the fax machine's speaker or "on-hook", then manually dial the number. Listen carefully as the machine dials and make sure it's even dialing out. Do not hit start until you hear the other fax machine pick up. If the "fast" busy signal occurs before dialing is complete or right after, have your phone line checked.

Aug 29, 2009 | Office Equipment & Supplies

1 Answer

Status 50 on a fax estudio 45


the number is busy. Try pressing the monitor button and listening for a dial tone. No dial tone means your phone line is not working. If you have dial tone, dial the number you wish to fax and listen to see if it picks up. If you get a busy signal, or hear someone answer, that is why it's not working. If you hear the fax tones, press start and send your document. This is a way to fax that allows you to hear the whole process.

Aug 10, 2009 | Toshiba E-STUDIO 450 Copier

1 Answer

Can not send out faxes


You have to get your phone line checked out .

Apr 28, 2009 | Brother IntelliFax-2820 Laser Fax

2 Answers

Have dial tone, but can't fax


It sounds like the modem is bad a possible electric serge

Jan 08, 2009 | Brother IntelliFAX 4100 Laser Fax

2 Answers

HELP WITH LUCENT PHONE


Dial into vociemail, ht elady will say "Welcome to ............"

Fill in the blanks.

We need to know that before we can tell you.

Oct 23, 2008 | Lucent PARTNER18 Corded Phone

1 Answer

Modem busy


Hi, could be somthing stupid like your internet provider. easy way to tell if its the pc, when you get the busy on your modem, pick up the house phone and dial the number you are trying to connect to the internet with. if you get a whining then its somthing to do with the pc, if you get a busy tone then its your internet provider. as most providers aint handling as many customers through dial up as they are moving to broadband :-) Hope this helps John

Jan 17, 2007 | Lucent (300075330) Modem

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lucent Lands Phones Experts

Cindy Wells

Level 3 Expert

6220 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Lucent Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...