Question about Home Fencing

1 Answer

Gate closes then reopens a foot or so. I have a MM560

Posted by kws58958 on

Ad

1 Answer

Clive

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 882 Answers

The controller most likely needs to be re-calibrated.
We had the same problem and called the company, who reset the travel and stop settings.
Apparently this can happen if the gate / gearing assembly goes 'off-track' and skips some teeth.
So call a tech who's qualified in this model, or
go to the website for this MM560, and download the manual.
My two cent's worth, anyway. :)

Posted on Nov 18, 2017

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust open close limits on a 4 meter gate for a Germin motor


on the shaft that controls the arm or gear for the gate movement there will be 2 cams
open the gate and then loosen of one cam and adjust it off the micro switch until the gate is fully open
lightly tension the screw and then close the gate
repeat the adjusting on the second cam until the gate is fully closed
tension up the screw and then using the remote open the gate when it is fully open leave it or in it is not make small adjustment to get it open
press the remote to close the gate and again adjust to properly close the gate

May 02, 2018 | Cars & Trucks

1 Answer

New FM502 Dual gate opener pressed remote which starts the second gate opening then the master moves a few inches stops. Hear 3 beeps 2 seconds 3-. .Conections are good to circuit board! What up!


reprogram the opening sequence in the control box
it should that the first gate opens then the second gate opens a few seconds behind it
closing is the reverse
you can program that only one gate opens
you can also program that one gate is a entrance gate where it opens until you stop it , then when you have passed through , press it again and it closes
read the operating instructions and follow the programming procedures closely

Oct 24, 2016 | Miscellaneous

1 Answer

What could be wrong? Our Gemini gate motor works well for some time, but then all of a sudden just go backwards when it should close the gate. It just revers with each attempt to let it go forward till at...


You could have dirty photo cells or some obstruction that the photocells are picking up that triggers the safety mechanism to reopen the gate so that no one gets hurt.

Extreme weather conditions (heat and cold) can damage the electronics in the photo cells too.

Are the batteries low on the transmitter?

Typically, photo cells are (or should be) wired to the control board so that it will stop the gate or barrier during the closing cycle should there be a problem- and should fully open again- just like on automatic garage door openers; it's the exact same principal.

Feb 28, 2015 | Cars & Trucks

1 Answer

2007 yukon xl lift gate unable to open


try open the left back door first then the outher one

Jan 03, 2014 | 2004 Chevrolet Suburban

1 Answer

Gate light on even when gate is closed


Open gate and find where the wiring enters the gate (bottom of door) pull back the rubber insulator and check for broken wires or wires touching each other.

Mar 05, 2013 | 2010 Jeep Liberty

1 Answer

My Centurion D5 will intermittently reopen the gate immediately after I close it. The LED lights flash 4 times which I believe indicates an obtruction but there is no obstruction. Any thoughts as to w


Hi there. The symptoms you describe as well as the error indication (4 flashes) certainly do seem to indicate an obstruction. Try disengaging the gate, moving it back and fourth and feeling whether it sticks at any particular point. Possible causes could be: dirt or stones on the rail, bad rack joints, missing teeth in the rack, worn wheels or guide-rollers or a damaged rail. You can also try decreasing the collision sensitivity (I can send you an email with the info if you like), but please be advised that this makes the gate less sensitive to an obstruction and could pose a risk. How old is the motor, if I may ask?

Nov 27, 2012 | Cars & Trucks

1 Answer

How do I find the undo tab in Internet Explorer 8 How can I receive a instrustion manual for Internet Explorer 8


Hi,

Please follow the below steps to undo Tab in IE8

To Reopen Closed Tabs in IE8 with Keyboard Shortcut

Press Ctrl + Shift + T keyboard shortcut will reopen the last closed tab. Press the same keyboard shortcut sequence again will open another tab that was closed prior before the previously opened tab. Ctrl + Shift + T supports restoration of up to last 10 tabs that are closed during the browsing session.

To Restore Closed Tabs in IE8 in New Tab Page

If may be easier to be able to browse and select which already closed tabs that user wants to reopen. IE8 provides such as option to reopen one or more closed tabs too, in "New Tab" page, which also displays complete web page titles of the closed tabs.

To open a new tab page, just press Ctrl + T keyboard shortcut, or click on New Tab button on the Tab bar.

Open New Tab in IE8

In the new tab page, there will be a Reopen closed tabs section. The last ten recently closed tabs that have been closed since starting Internet Explorer will be listed. Just click on the one that user wants to reopen. To reopen all closed tabs, just click on Open All link.

you may also download the user manual for IE8 from the below link,

http://download.microsoft.com/download/9/7...August%2008.pdf

Oct 09, 2010 | Microsoft Internet Explorer 8

1 Answer

Can create shortcut on Vaio Gate


hey just bought a sony and had the same prob, after looking its not to hard, just a quick edit to an .xml.

open the folder %AppData%\Sony Corporation\VAIO Gate and locate the file called VAIO Gate.xml.

Make a copy of this file so if you go wrong you can always restore the ori and start again.

Right click on it and click edit which should open the file in notepad.

Now copy the code i will paste after this, on a new line below into the doc after you find the first </Item>

n.b follow this word for word otherwise it wont work.
everything in between the *need to be replaced with what it tells you. when you have replaced the hints removed the star. When you finish there should be no stars in your code.

This is the code to pase in after the first </Item>

<Item Type="2" DisplayId="app.*first 4 letters of app*">
<DisplayString>*display name you will see in the gate app*</DisplayString>
<DisplayTip></DisplayTip>
<AppPath>*path to the .exe, e.g C:\Program Files (x86)\Adobe\Adobe Flash CS4\flash.exe no need for any quote marks*</AppPath>
<SupportTouch>0</SupportTouch>
<SupportRemocon>0</SupportRemocon>
<WorkDirectry></WorkDirectry>
<Option></Option>
</Item>

thats it save the file, close the gate and reopen it and if you will see the new icons. You can then drag to arrange where you want them in the line.

katg

Apr 25, 2010 | Sony VAIO CW2SGXB Notebook Core i3 i3330M...

1 Answer

Loading tray will not load or close-reopens immediately


Sounds like the tray position switch has gone wrong.

Sep 30, 2007 | Onkyo DX-C340 CD Player

Not finding what you are looking for?
Home Fencing Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Fencing Experts

Tom Chichester

Level 3 Expert

61131 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Home Fencing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...